Gesucht nach VW | Golf III | 2.9 VR6 Syncro | 1H1

• ✓ for VW Golf MK 4 Audi A3 Polo, etc 
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 57cm / transparent covered

Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.

• ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage

• ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
• ✓ conversion to mechanical clutch

• ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
• ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
• ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4

• ✓ large master brake cylinder / main brake cylinder, ideal on all models Golf MK1 Caddy Scirrocco Jetta for a brake conversion to G60 brake. Necessary in order to reach the better volumetric efficiency of the brake and the full brake pressure.

• ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.

• ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
• ✓ 1.brake disc: 312x25
• ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
• ✓ 2.brake disc: 334x32

• ✓ large master cylinder / main brake cylinder, ideal on all VW models without ABS for a brake conversion to Porsche brake. Or simply to increase the original brake pressure.

• ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento

• ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo ZR17 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm.

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓  sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J  5 speed manual gearbox, e.g on VW Golf MK4 R32 models

Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.

• ✓ conversion kit to hydraulic clutch Golf Mk4
• ✓ suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio

• ✓ for rear axle: Golf MK3 Syncro, Corrado Syncro, Passat 35i Syncro
• ✓ brake caliper:VW Golf R32 V6 oder S3 VW , reference  left 8N0615423C  , right 8N0615424C
• ✓ brake caliper mounting bracket: reference 8N0615425B
• ✓ brake disc: Passat 35i VR6 , reference 1H0615301, 280 mm

• ✓ aluminuim bush for Golf MK3 MK4,  cable gearbox

• ✓ gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado

• ✓ for Golf MK2, MK3, for example Passat Corrado Jetta
• ✓ gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6

Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.

• ✓ for all VW VR6 engines with 2,8 and 2,9 AAA and ABV
• ✓ e.g. VW Passat VR6 2,9l ABV
• ✓ total weight: 4,1 kg / saving weight compared to the original: 6.8 kg

• ✓ getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2  MK3, Vento

Short shifter in stainles steel. Tailor-made for VW Golf 2/3 Cabrio,Jetta ,Vento,Passat and Seat Toledo.
50-70% reduction of gear shift distance.

• ✓ for front axle: Golf MK3, Passat 35i VR6,Corrado VR6
• ✓ brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422 Brembo reference : left 20.7673.03 + right 20.7673.04
• ✓ brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301

• ✓ for e.g VW T5 T6 bus / transporter
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 60cm  / transparent covered

• ✓ engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine

• ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle,  stable up to 800 HP

• ✓ conversion kit to convert the VW Golf  MK2 MK3 Syncro rear axle. Adjustement of track and camber

• ✓ Front sheet metal support  VW Golf MK2 MK3 VR6 G60 Jetta Passat Corrado to get more space to install a larger radiator

• ✓ for front axle:  Golf MK4 25 years Jubi GTI / V5, Golf MK4 V6, Audi S3 8L,TT
• ✓ brake caliper: S3 /R32 reference : left 1J0615125B , right 1J0615126
• ✓ brake disc: S3 R32  312x25mm  reference : left 1J0615301AA , right 1J0615302A
• ✓ brake pad: S3 /R32  reference : 8D0698151D

• ✓ 1x 3mm reinforcing steel plate for underide protection, for VR6 oil sump/ pan, suitable for all  vehicles with VR6 engine, for example  Golf MK1 MK2 MK3 Corrado Vento, etc.

• ✓ front engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 motor

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
• ✓ to rims with PCD : 4x108
• ✓ brake disc diameter : 57,,1
• ✓ enlargement per wheel : 20mm

• ✓ 1x reinforced engine mount set for VW Golf 3 Vento VR6 16V GTI
• ✓ shore hardness 68

• ✓ connection reducer to radiator water inlet. Is required on Golf MK1 for conversin to VR6 / R32 engine

• ✓ conversion kit to convert the Syncro rear axle of Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc

• ✓ for VW Golf MK4 Audi A3 Polo, etc.
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 20cm / transparent covered

• ✓ reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines

• ✓ adapter ring for the  Polo 9N wheel hub
• ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over

• ✓ for Golf MK2, MK3 series, e.g. Passat Corrado Jetta
• ✓ gearbox: 6 speed 02M , based on Golf 4 R32 / V6

• ✓ for fraont axle: Golf VR6,Corrado VR6,Passat 35i
• ✓ brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
• ✓ brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A