You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Lightened Flywheel Golf Corrado MK1 2 3 VR6 Motor Gearbox AAA ABV 2,8 2,9 light steel

€251.83*

Available
Delivery by Saturday, 11.05.2024 if you order within the next 3 Hours.
Product number: 566
Weight: 4.1 kg

Lightened  flywheel made of chrome molybdenum suitable for all VW VR6 with 2,8 / 2,9 AAA and ABV engines, inclusive Syncro, Passat VR6 2,9l Motor ABV in conjunction with a 5-speed gearbox.

Below in the suitable accessories you will find the Sachs Performance clutch pressure plate you need. You can also choose between the matching organic or racing Sachs Performance clutch disc.

Advantages of our lightened flywheel:

  • our flywheel weighs only 4,1 kg, the standard wheel over 6.8 kg
  • recognized for unlimited HP
  • significantly better acceleration due to less inertia
  • the engine runs faster, no loss of performance.
  • suitable for motorsports, racing or serial vehicles
  • lower fuel consumption
  • significant reduction of the turbo lag
  • precision balancing, bearings are less affected, finely balanced according to DIN ISO 1940
  • including ring gear
  • Our flywheels are registration-free as they have no direct effect on the actual performance.

Scope of delivery:

  • 1x lightened high-strength flywheel made of chrome molybdenum all VW VR6 with 2,8 / 2,9 AAA and ABV engines in conjunction with a 5-speed gearbox.
  • Installation instructions

Our lightened flywheels are registration-free and therefore do not need to be registered.

2 of 2 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


26 July 2023 08:11

Autohaus V

Alles top Super schnelle Abwicklung gerne wieder

20 July 2022 16:29

François Xavier D

Belle finition avec la couronne de démarreur intégrée.

  • Which screws can be used?
  • The original bolts can be reinstalled.

  • Which clutch can be used with the Epytec flywheels?
  • You can continue to use the original clutch or an identical Sport / Performance clutch. Please check with the clutch manufacturer whether these are of the same design as the originals. If this is the case, then it will also fit 100%

  • What is the friction coefficient of the flywheel?
  • In principle, the friction coefficient can be assumed to be at least the same as that of the original cast disc. Due to the higher alloyed steel, our pulleys are slightly better than the original cast pulley. Of course, the material of the friction disk also has a major influence here; this must be checked with the manufacturer of the friction disk

  • What material are the flywheels made of?
  • The flywheel is made of 16MnCr (chromium molybdenum) steel, which means it has a density of 7.76 kg/dm³

  • Does the flywheel have a TDC marking and other markings for the ignition?
  • The flywheel has no TDC marking, only the pin on the back, just like the original flywheel. Tip: To adopt the TDC marking, the original flywheel must be turned to the TDC point before disassembly and the new flywheel must be marked in exactly this position.

  • Does the flywheel have the default unbalance or is it balanced to zero?
  • The flywheel is supplied with the default unbalance. Unbalance can be created as follows! We first balance the pulley to 0, then apply a test mass at the specified point, which corresponds exactly to the unbalance. The pulley is then balanced to 0 again with the test mass. If you now remove the test mass, you have exactly the specified unbalance.

  • Do we only sell the ring gear / gearwheel of the flywheels?
  • No, we can only sell the flywheels complete.

  • Why do I have to run in my clutch?
  • The principle of a clutch is similar to that of a brake system. The different materials / surfaces must first adapt to each other. This happens through friction. With standard clutches or organic linings, this happens relatively quickly, as the lining material is "softer" than with sintered metal linings.

Passendes Zubehör

VR6 Gear Cable Aluminum Rubber Bush Direct Circuit Replaces Rubber Bushing,
Aluminum bush / bushing for Golf VR6 control cable gear

€29.60*
Artikelnummer: 172
Reinforcing Plate Engine Cylinder Block Vr6 VW VR6 Turbo Golf R32 MK1 MK2 MK3 MK4
  • ✓ reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines

€198.20*
Artikelnummer: 602
VR6 Manifold heat shield Turbo

€40.26*
Artikelnummer: 599
Clutch VW Golf Corrado Passat G60 GTI 16V 228mm Clutch Disc SACHS Performance Torsion-damped Organic
  • ✓ torsion spring clutch disc with organic performance clutch coating/lining 
  • ✓ transmittable torque [Nm]: 520
  • ✓ diameter [mm]: 228 
  • ✓ number of teeth: 10 
  • ✓ hub profile: 23x29-10N

€387.26*
Artikelnummer: SAP104
Pressure Plate Clutch Reinforced VW Golf MK2 MK3 Passat Polo 1.8 G60 1.9TDI 16V 2.0 228mm SACHS
  • ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
  • ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate

€362.94*
Artikelnummer: SAP103
Clutch Sintered VW Golf Corrado Passat G60 GTI 16V 228mm Clutch Disc SACHS Racing Torsion-damped Clutch Disc
  • ✓ torsion spring clutch disc with organic sinterpad clutch coating/lining
  • ✓ transmittable torque [Nm]: 520
  • ✓ diameter [mm]: 228 
  • ✓ number of teeth: 28 
  • ✓ hub profile: 20,3x22,1-28N

€392.78*
Artikelnummer: SAP105
VR6 02a G60 direct gearstick cable replaced by aluminium bushing Gearshift bracket Gearshift cable 57 711 969A replaces rubber bushing
  • ✓ Aluminium bushing for Golf VR6 02a G60 cable gearstick

€34.99*
Artikelnummer: 1109
You can find out everything about your order via your -> View customer account