Gesucht nach VW | Jetta II | 1.8 16V | 165, 19E, 1G2

• ✓ for VW Golf MK 4 Audi A3 Polo, etc 
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 57cm / transparent covered

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage

• ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine

• ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
• ✓ conversion to mechanical clutch

• ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
• ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
• ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4

• ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.

Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 57cm  / transparent covered

• ✓  sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J  5 speed manual gearbox, e.g on VW Golf MK4 R32 models

Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.

• ✓ for rear axle: VW Golf MK2, MK3, GTI, VR6, Corrado, Jetta, Passat 35i, Scirocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
• ✓ brakce caliper: Audi R32 S3 rear
• ✓ brake disc: Audi R32/S3 rear 256x22mm

• ✓ conversion kit to hydraulic clutch from Golf MK4
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ aluminuim bush for Golf MK3 MK4,  cable gearbox

Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.

Short shifter in stainles steel. Tailor-made for VW Golf 2/3 Cabrio,Jetta ,Vento,Passat and Seat Toledo.
50-70% reduction of gear shift distance.

• ✓ clutch slave cylinder from VW Golf 4, Audi A3, Seat Leon and Skoda Octavia

• ✓ for e.g VW T5 T6 bus / transporter
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 60cm  / transparent covered

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ for all engines-models with 020 gearbox (engine reference: PL, KR)
• ✓ e.g VW Golf MK2 16V, VW Scirocco 16V, VW Jetta 16V and Audi 80 
• ✓ total weight: 2,9 kg / saving weight compared to the original: 2,6 kg

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ for rear axle: Golf MK1, Golf MK1 Cabrio, MK2, MK3, GTI, VR6, Caddy 14d,Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza,Toledo
• ✓ brake caliper: Porsche , reference: 996.352.421 + 996.352.422
• ✓ rear axle: brake caliper with mounting brackets from Audi S3 8L or VW Golf R32
• ✓ brake disc: Golf G60 5-hole  280mm VR6

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
• ✓ to rims with PCD : 4x108
• ✓ brake disc diameter : 57,,1
• ✓ enlargement per wheel : 20mm

Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche 986 Brembo 4 Piston brake calipers on VW vehicles.

• ✓ adapter ring for the  Polo 9N wheel hub
• ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over

• ✓ for front axle: Golf MK1, MK2, Mk3, Passat, Corrado, Jetta, Polo, Seat Toledo
• ✓ brake caliper: Porsche Cayenne or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T
• ✓ brake disc: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A

• ✓ axle journal VW Polo 6N2 GTI

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric: 57,1
• ✓ rims with P.C.D. : 5x130
• ✓ rims diameter : 71,6
• ✓ enlargement per wheel: 20mm

• ✓ for e.g. VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta, and many more.
• ✓ Connection 1 M10x1 male thread bent 45°
• ✓ Connection 2 M10x1 female thread straight
• ✓ Length 52cm long / Transparent sheathed

• ✓ baffle plate (complete KIT) made of 1.5mm thick steel for all G60 16V 16 Turbo oil pan

• ✓ for front axle: VW Golf MK2 MK3, Seat Ibiza Cupra R, VW Passat, Corrado, Jetta, Polo, Seat Toledo
• ✓ brake caliper: Porsche Cayenne (rear axle) , reference  955.352.421 + 955.352.422/  Brembo reference left 20.7673.03 + right 20.7673.04
• ✓ brake disc: Seat Leon Cupra R 323x28 reference 1ML 615 301

• ✓ for conversion Golf MK1 MK2 MK3 Caddy, etc
• ✓ 1x short drive shaft flange , reference 02M 409 356 A
• ✓ 1x sealing ring , reference 02M 409 189

• ✓ for rear axle: Golf 1, Golf 1 Cabrio, 2, 3, GTI, VR6, Caddy 14d, Jetta, Corrado, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
• ✓ brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
• ✓ brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
• ✓ brake disc: VR6 280x22mm, VW reference 1H0615301A

• ✓ hand brake cable adapter for conversion from R8 hand brake caliper to Golf MK3 MK4 hand brake cable 

• ✓ for front axle: VW Golf Corrado Passat 2 3 G60
• ✓ brake caliper: Porsche 996 (rear axle), reference 996.352.422 + 996.352.421 
• ✓ brake disc: Audi S3 (8L) /Golf MK4 GTI 312x25mm, reference  8N0 615 301 A

Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.

• ✓ accelerator pedal / gas pedal adapter which is required, if you want to install the Golf MK4 Audi TT engines into your Golf MK2, Corrado or Passat 35i

• ✓ for e.g Golf MK2, MK3, Jetta, Corrado, Caddy, etc.
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 23cm  / transparent covered

• ✓ conversion kit for 7-speed 4Motion 4WD gearbox to convert to 2WD front-wheel drive. Thus, the 7-speed 02M transmission can be installed in all front-wheel drive vehicles

• ✓ suitable for Golf MK2, Jetta, Corrado, Passat 35i 
• ✓ 1x accelerator cable adapter 
• ✓ 1x screw material

• ✓ for rear axle: Golf 1, 2, 3, GTI, VR6, Corrado, Jetta, Passat 35i, Scirrocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
• ✓ Brake caliper: VW Golf R32 V6 or S3 left brake caliper VW part number 8N0615423C, right brake caliper VW part number 8N0615424C
• ✓ Brake Caliper Bracket: Part No: 8N0615425B
• ✓ brake disc:
  • ✓ if 5 holes are driven: Golf 3 VR6 brake disc 280x22mm VW part number 1H0615301A pot depth 29mm
  • ✓ when driving 4 holes: Golf 2 G60 brake disc 280x22mm VW part number 535615301 pot depth 40mm

• ✓ for rear axle: VW Golf Mk1, Mk2, Mk3, Scirocco, Jetta, Vento, and many more.
• ✓ brake disc: R32/S3 256x22mm, reference 8L0 615 601
• ✓ brake caliper mounting bracket: VW Passat W8, reference 4D0 615 425B
• ✓ brake caliper: R32/S3 rear , reference 8N0615423C / 8N0615424C
• ✓ brake pad: reference 1J0 698 451 K / 4B0 698 451
• ✓ stub axle: Polo 6N2 GTI (Year of construction approx. 2001) 6N0 501 117 (left) + 6N0 501 118 (right)
• ✓ ABS ring: reference1J0 614 149
• ✓ Polo 9N wheel hubs: reference 6Q0 598 611