You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Mercedes Benz CL 65 AMG Ceramic Brake System SLS C197 Brake Caliper Adapter Rear Axle

  • ✓ 295x28 A1974230112 Mercedes SLS C197 brake disc
  • ✓ 6-piston A1974231098 Mercedes SLS C197 brake caliper
  • ✓ rear axle

€250.52*

6-8 weeks product will be made for you,
Delivery by Friday, 30.08.2024 if you order within the next 14 Hours.
Product number: 788-Sonder
Weight: 1.726 kg
Einbauort: hinten
Lochabstand Achsschenkel: 90mm
Lochabstand Bremssattel : 170mm
Your benefits
  • Easy TÜV registration
  • Quality Made in Germany
  • Fair prices without middlemen you buy directly from the manufacturer and developer of the product
  • Worldwide no. 1 in tuning adapters
  • 15 years expert knowledge
  • 10 years warranty

Brake caliper adapter, rear axle, on Mercedes Benz CL65 AMG to convert to Mercedes Benz SLS AMG ceramic brake system.

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • easy assembly
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • brake caliper: Mercedes SLS C197, reference A1974231098
  • brake disc: ceramic Mercedes SLS C197, front axle, 295mm, reference A1974230998

suitable front axle adapters are available in our shop, item no. 787.

Delivery:

  • 2x brake caliper adapters for Mercedes Benz CL65 AMG
  • high-strength mounting screws
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen, um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
  • Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den längeren Weg auszugleichen

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: hinten
Lochabstand Achsschenkel: 90mm
Lochabstand Bremssattel : 170mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
%
Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
€42.26
Item number: SF1
%
Mercedes C-Klasse C 55 AMG W203 SLK 350 Querlenker links / rechts mit Koppelstangen Vorderachse
  • ✓ front axle
  • ✓ Mercedes-Benz C-Class C 55 AMG (W203), Mercedes-Benz SLK 350
  • ✓ OE number 203 320 0489,203 320 2589

€268.84*
€241.96
Item number: APA142
%
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ to configure yourself
  • ✓ with TÜV certificate
  • ✓ best quality

€96.00*
€86.40
Item number: LK1
You can find out everything about your order via your -> View customer account