Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Golf MK1 Caddy Scirocco Conversion Kit VR5 Engine 5-speed Gearbox 02A 02J

  • ✓ Golf 1, Caddy 1, Scirocco
  • ✓ 02A/02J 5-speed gearbox, VR5 20V/ 10V AQN AGZ engine
  • ✓ original pedals
Complete conversion kit on models VW Golf MK1, Scirocco and Caddy 1 for conversion to the das 02A / 02J 5-speed gearbox, combined with the VR5 20V or 10V AQN AGZ engine. The reinforced gear and motor mounting brackets ensure maximum stability and can withstand the most extreme loads. 
Furthermore, the lateral gearbox mounting bracket is included for an easier and time-saving conversion to an 02A and 02J 5-speed gearbox. Our bracket is much more stable than the original and is therefore ideally suited for the conversion.
In addition, reinforced engine and gearbox bearings are installed, which are perfect for all tuned engines and are more durable compared to the standard bearings.

This conversion kit contains all parts that we recommend for a conversion on models VW Golf MK1, Scirocco and Caddy 1 to the das 02A / 02J gearbox, combined with the VR5 20V or 10V AQN AGZ engine.

This is the perfect all-in-one solution for your conversion.. 

Advantages:

  • quick and easy complete conversion
  • your don't need to upgrade after this conversion
  • original pedals (clutch and brake) can be retained
  • long-life-cycle
  • no modification of the body
  • time saving

Delivery:

  • 2x gearbox mounting brackets for VW Golf MK1 Caddy
  • 1x engine support / holder for VW Golf MK1 Caddy Scirocco Jetta 1 & 2 for VR5 20V 10V AQN AGZ engine conversion
  • rubber bearing
  • reinforced engine and gearbox bearings
  • material certificate

2 of 2 reviews

Average rating of 4.5 out of 5 stars


50%

50%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


6 August 2023 12:56

Review with rating of 5 out of 5 stars

Timo R

Bestellung und Lieferung ging gix. Macht einem sehr guten Eindruck und es ist alles dabei was man braucht. Mehr kann ich noch nicht sagen da es noch nicht zum Einbau gekommen ist.

3 June 2022 08:06

Review with rating of 4 out of 5 stars

Robert P

Der Adaptersatz macht einen vernünftigen Eindruck und die Materialqualität ist sehr gut. Was nicht so besonders schön ist, dass die Lagerhülsen nicht 100% rund sind was die Vorarbeit des einpressens erheblich vergrößert. Einbau ist natürlich selbsterklärend, jedoch wäre eine kleine Einbaudokumentation super. Was mich persönlich etwas geärgert hat ist, dass es im Umbausatz für den VR6 eine Drehmomentstütze gibt die dem Satz für den VR5 leider nicht vorhanden ist aber benötigt wird.

  • I can't get the clutch cable to attach to the transmission mount, what do I have to do?
  • It can happen that the gearshift tower (no. 3 image) is next to the transmission mount. In this case, you will not get the clutch cable holder (no. 1 image) mounted correctly and the clutch cable (no. 2 image) will not be mounted either. 


    In this case, we can offer you the following solution.


    With our counterholder for the clutch cable, you can avoid exactly this problem. In this case, you do not need to fit the small bracket for the clutch cable above (no. 1 image), but can simply use our counter bracket (click here). This is installed as shown in the picture:



    As soon as the counterholder (click here) is fitted, you have created the necessary space to be able to fit the clutch cable correctly.



  • In which position do I have to press in the bearings?
  • The position is always different due to the tolerances on the bodies. It is best to proceed as follows:


    -Mount the engine and gearbox mount (without bearings).


    -Hang the engine and gearbox in the vehicle so that everything fits perfectly.


    -Mark the position where the bearings are to be pressed in.


    -Press the bearings into place.



    Because the bearings are eccentric, you can align the engine and gearbox perfectly.

Questions? Click here for the contact form

Average rating of 4.8 out of 5 stars

Bearing Bracket Gear Mounting Bracket Rear 171 399 141 A VW Golf MK1 Caddy Scirocco G60 VR6 1,8T AGU Engine Conversion Gearbox Support 02J 02A CDA
  • ✓ Golf 1, Scirooco, Jetta, Caddy 14D
  • ✓ 5-speed 02J 02A CDA, 6-speed 02m 02Q, DQ250 gearbox
  • ✓ 171399141A /171 399 141

€112.26*
Item number: 509

Average rating of 4.7 out of 5 stars

VW Gearbox Engine Bracket Golf MK1 Caddy Scirocco VR5 20V and 10V AQN AGZ 02J
  • ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
  • ✓ 02A/02J/EBA gearbox
  • ✓ VR5 20V and 10V AQN AGZ motors

€155.64*
Item number: 161

Average rating of 4.8 out of 5 stars

Fuse Box Fusebox VW Golf MK1 Conversion to 02A Gearbox 5-Speed Engine Conversion
  • ✓ Switch box adapter plate
  • ✓ VW Golf 1 series conversion to 02A gearbox
  • ✓ Time saving

€31.99*
Item number: 870

Average rating of 5 out of 5 stars

VW Golf Caddy Scirocco Engine Mounting Bracket Support VR 5 Engine Conversion
  • ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
  • ✓ 02A/02J/EBA transmission
  • ✓ VR5 20V and 10V AQN AGZ motors

€93.84*
Item number: 161-T1

Average rating of 4.9 out of 5 stars

Front Reinforcement Crossbar VW Golf MK1 Caddy Scirocco 1 VR6 1,8T Conversion
  • ✓ Golf 1, Caddy 14d, Scirroco 1
  • ✓ VR6 1.8T engine
  • ✓ stable cross member front panel

€121.10*
Item number: 192

Average rating of 5 out of 5 stars

VW Golf Passat Corrado VR6 Engine Assembly Stand Conversion
  • ✓ assembly stand
  • ✓ VR6 engine conversion
  • ✓ VW Golf, Passat, Corrado

€116.98*
Item number: 861

Average rating of 4.8 out of 5 stars

VW Golf MK1 Cable Gearbox Mounting Bracket Caddy G60 VR6 1.8 T AGU Engine Conversion
  • ✓ Reinforced version
  • ✓ 02A 02J gearbox
  • ✓ G60 VR6 in Golf 1

€38.99*
Item number: 544

Average rating of 5 out of 5 stars

Reinforced Engine Mounting Bearing Gearbox Mounting Bearing Golf MK1 Scirocco Caddy Jetta 74mm Ø Shore Hardness 68
  • ✓ 65mm diameter
  • ✓ OEM number: 171 199 214D
  • ✓ reinforced Shore 68

€20.54*
Item number: 583

Average rating of 5 out of 5 stars

VW Golf MK1 Cable Gearbox Bracket Caddy G60 VR6 1.8 T 02 J Transmission BracketEngine Conversion
  • ✓ Reinforced version
  • ✓ 02A 02J gearbox
  • ✓ G60 VR6 in Golf 1

€74.93*
Item number: 534-

Average rating of 4.7 out of 5 stars

Engine bracket Golf Scirocco Caddy 1 Rubber Gearboc cradle Motor holder PU Shore 65-70
  • ✓ Complete set of 4
  • ✓ Reinforced Shore 65-70
  • ✓ Golf 1 Caddy 14D Scirocco Jetta

€86.63*
Item number: 445