Bremssatteladapter W447 Vito V-Klasse Hinterachse auf 4-Kolben Bremssattel mit 360x26mm Bremmscheibe
- ✓ 360x26 A1974230112 / 1974230112 Mercedes GL brake disc
- ✓ 4-piston A1974232798 / A1974232898 Mercedes SLS C197 brake caliper
- ✓ rear axle
€233.17*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssatteladapter für die Hinterachse des Mercedes W447 Viano auf die Mercedes SLS C197 AMG 4-Kolben Brembo - Bremssättel in Verbindung mit den Bremsscheiben 360x26 vom Mercedes SLS C197 AMG.
Um die Bremsanlage umzubauen, muss die Handbremse auf die Handbremsbacken von der Mercedes Benz E-Klasse (W211) umgebaut werden.
Das ist kein großer Aufwand, da die Spreizbleche vom W447 übernommen werden können und einfach nur die Bremsbacken getauscht werden müssen, damit die Bremsscheibe 360x26 vom Mercedes SLS C197 AMG montiert werden kann.
Die Adapter passen für folgende Fahrzeuge:
- Mercedes W447 Viano / Vito
Vorteile dieser Bremsanlage:
- extreme Verzögerungswerte auch in Verbindung mit unserer Vorderachsbremsanlage
- Top Verzögerungswerte, kein Vergleich zur den herkömmlichen Bremsscheiben hinten
- durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
- direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
- unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Euren Serienteilen, kein Umschweißen, Umfräsen oder Umbohren.
- originales Handbremsseil kann weiter verwendet werden und muss nicht gekürzt werden
Benötigte Komponenten:
- Mercedes SLS C197 AMG 4-Kolben Brembo - Bremssättel, Teilenummer: A1974232798 / A1974232898 ; Brembo Nummer: 20.A748.04
- Bremsbeläge, Teilenummer: A0074207220, A0064200820, 0054206420
- Bremsscheiben vom Mercedes Benz GL - Klasse 360x26mm Teilenummer: A1974230112, 1974230112, Brembo Teilenummer: 09.A907.11
- Handbremsbacken von der Mercedes Benz E-Klasse (W211) Teilenummer: 2304200312, 2304200320
Lieferumfang:
- 2x Bremssatteladapter für die Hinterachse des Mercedes W447 Viano Vito, V-Klasse
- hochfestes Schraubenmaterial
- Materialzertifikat
- Einbauanleitung (hier klicken)
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 360x26
- ✓ 67mm centering
- ✓ 58mm height
- ✓ 1994200020 / 2304200312
- ✓ OEM quality
- ✓ Mercedes E-Class. (W211 / S211 / VF211) and much more.
- ✓ 375x36 1664210912 Mercedes GL brake disc
- ✓ 8-piston A0034200983 / A003420108 Mercedes W219 CLS 55 brake caliper
- ✓ front axle
- ✓ 390x36 A2304211212 Mercedes GLS 63 brake disc
- ✓ 6-piston A2314212698 Mercedes W212 W218 brake caliper
- ✓ front axle