Bremssatteladapter BMW 5er F10 F11 Xdrive Bremsanlage 4 Kolben Bremssattel BMW 7er G11 G12 Bremsscheibe 395x36 BMW X3 M X4 M Tuning Adapter
- ✓ 395x36 34118054825 BMW F95-98 brake disc
- ✓ 4-piston 34106891335 / 34106891336 BMW G11 / G12 brake caliper
- ✓ front axle
€62.59*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssattel Adapter für die Vorderachse des 5er, 6er BMW F10, F11 Xdrive und allen heckgetriebenen BMW, um die BMW G11, G12 4-Kolben Bremssättel in Verbindung mit den BMW X3 M, X4 M, X5 M, X6 M 395x36mm Bremsscheiben zu fahren.
Die BMW G11 und G12 4-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning Adapters an die originale Achsaufnahme geschraubt.
Vorteile dieser Bremsanlage:
- Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben
- einfache Montage
- ein Muss bei Leistungssteigerung
- Materialzertifikat wird mitgeliefert
- einfach wieder in original Zustand rückrüstbar
Benötigte Komponenten:
- BMW G11, G12 4-Kolben Brembo Bremssättel Teile Nr. 34106891335 / 34106891336
- Bremsscheibe vom BMW F95, F96, F97, F98 von der Vorderachse in 395x36mm Teilenummer: 34118054825
Lieferumfang:
- 2x Bremssattel Adapter für 5er, 6er BMW F10, F11 Xdrive und heckgetriebenen Modellen
- passender Schraubensatz
- Materialzertifikat
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 February 2024 17:42
alpinabraut
Alles wie immer ,Perfekt
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 369x24 34212284104 / 34112284103 BMW F10 M5 brake disc
- ✓ 1-piston 34217845816 / 34217845818 BMW M5 F10 brake caliper
- ✓ rear axle
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking