Bremssattel Adapter Audi 100 A6 C4 Bremsanlage Audi C5 Audi A8 Bremsscheibe 269x22 Frontantrieb
- ✓ 269x22 4B3615601 Audi A8
- ✓ 1-piston LUCAS / Girling 43447615424 brake caliper
- ✓ rear axle
€93.77*
Sold out
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssatteladapter für die Hinterasche um die Audi C5 (4B) Bremssättel in Verbindung mit den Bremsscheiben 269x22 vom Audi A8 am Audi A6 (C4) zu verbauen.
Dies hat folgende Vorteile für Sie:
- der AUDI-Lochkreis von 5x112 mm kann beibehalten werden. daher kein kostenintensiver Umbau
- kostengünstige Bremsscheiben, du bekommst das Paar schon für ca. 170 €.
- sehr gute Verzögerungswerte
- problemos wieder in original Zustand rückrüstbar
- doppelte Einsatzdauer gegenüber der original Bremsanlage
- Halter bestehen aus hochfester Stahl Legierung (inklusive Material Zertifikat)
- durch das im Lieferumfang enthaltene Material Zertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
Benötigte Komponenten:
- Bremsscheiben vom Audi A8 269x22 Teilenummer: 4B3615601
- Bremssattel vom Audi (C5/4B) A6/S6 4.2 V8 Quattro Teilenummer: LUCAS / Girling 43 447615424
- Bremssattelträger Audi Teilenummer: 4D0 615 425 B
Lieferumfang:
- 2 Bremssatteladapter für Audi A6 C4
- hochfester Schraubensatz
- Material Zertifikat
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 269x22
- ✓ 68mm centering
- ✓ 54mm height