Bolt circle adapter VW 4x100 to 5x120 BMW 20 piece 1-piece track plates BBS RS adapter
- ✓ 4x100 to 5x120
- ✓ 20mm per side
- ✓ 57.1 ->74.1 centering
€160.20*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High resistant bolt circle adapter.Tailor-made for all VW with 4x100mm bolt circle and centering hole of 57,1mm.
Fits for any kind of BMW wheel rim (also the popular BBS RS) with 5x120mm fixaton.
- Enlargement on each wheel : 20mm
- Enlargement of lane on axle : 40mm
- Mesure inner centering on bolt circle VW : 57,10 mm
- Mesure outer centering on bolt circle BMW: 74,10 mm
- Thread in adapter plate for wheel bolts: M14 x 1.5
All our delivered pieces are made in high quality alluminum and steel alloy.All supplied screws are high-strength (10.9).
Technical information for installation:
Fix the delivered adapter with 3 screws on the wheel hub.The eccentric has to be fixed in the 4th hole and then adjusted in the right position to adapt it on bolt circle.To finish fix the wheel rim with the 5 screws.This will give stability to the whole installation.
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Scope of delivery:
- 2x high resistant adapter for bolt circle conversion on one axle
- 2x high resistant eccentric
- 1x complet high resistant screw kit 10.9
- TÜV - certificate for registration
- Installation instructions
You are bidding on a bolt circle adapter for one axle. If you want your car to be fully equipped, please buy the item twice. The article is also available in a thickness of 25mm. So you can put together your set in the strength you need.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
27 March 2018 19:27
Petermichl N
Ausnahmslos weiter zu empfehlen DANKE
9 April 2017 22:46
patrickp5000
100% Zufrieden !!!! Immer gerne wieder !!!!
15 October 2020 09:13
Alexander B
Sehr gute Qualität umf Passgenauigkeit zudem sehr schnelle Lieferung und tollen Support was Gutachten und Materialfestigkeiten betrifft.
2 May 2022 16:41
tommy230873
Alles super,immer wieder
- How often do I have to pay the express surcharge if I have several products in one order or place several orders?
You only have to pay the express surcharge once per order. However, if you complete the order and place a new order, an express surcharge will apply again. The express surcharge therefore applies per order, not per product.
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ Eccentric for article 244
- ✓ spare part
- ✓ individual part