BMW E36 M3 Performance Brake Caliper Adapter Front Brake System 345x28
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW Performance brake caliper
- ✓ front axle
€169.29*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapters for the front axle of BMW E36 M3 to install the 6 piston BMW Performance brake calipers, combined with the 345x28mm E46 M3 brake discs.
Thanks to our adapter, the 6 piston BMW Performance brake calipers are simply screwed to the original axle instead of the original caliper.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: BMW Performance 6 piston from 135i , reference: left 34116786741 ; right 3411678674
- Brake pads from the BMW 135i Part No. 34 11 6 786 044
- bracke disc: BMW E46 M3 CSL front axle 345x28mm
Delivery:
- 2x brake caliper adapters for BMW E36 M3
- high strength mounting screws
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
10 February 2026 16:07
andkarl-56
Order delivered on time with no issues
10 August 2016 09:54
scrappycoco85
Top Verkäufer Verkäufer Note 1
13 September 2020 12:51
Sachverständigenbüro Christoph B
Passt Plug&Play. Eintragung mit teilegutachten soll ja danach recht problemlos funktionieren.
19 November 2025 15:05
stephenbogan1000
Order delivered on time with no issues
- Which brake pads should be used?
The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.
- Can I use other brake calipers as indicated in the required components?
No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:
- Can I also use other discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information:
https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
My brake caliper is not exactly centered over the brake disc - what should I do?
If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.
The most important thing is:
👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:
there is very little clearance on one side or the bolt lightly touches
while on the other side there is more play
This is generally not critical.
🔧 This is how you proceed:
Install brake pads:
First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:
If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:
If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:
slightly shim the adapter with suitable bushings to adjust the brake caliper
or – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again
👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.
| Motor | Motorcode |
|---|---|
| M 3.2 | E36|325PS(239KW) |
| M 3.2 | E36|321PS(236KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| Motor | Motorcode |
|---|---|
| M | E36|321PS(236KW) |
| M | E36|325PS(239KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| M3 3.0 | E36|286PS(210KW) |
| Motor | Motorcode |
|---|---|
| M 3.2 | E36|325PS(239KW) |
| M 3.2 | E36|321PS(236KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| Motor | Motorcode |
|---|---|
| M | E36|321PS(236KW) |
| M | E36|325PS(239KW) |
| Motor | Motorcode |
|---|---|
| M3 3.2 | E36|321PS(236KW) |
| M3 3.0 | E36|286PS(210KW) |
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 135i
- ✓ front axle
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ BMW E36, E46
- ✓ 325i,320i,316
- ✓ simple turbo conversion
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ clutch pin, clutch locking bolt
- ✓ BMW E30 E46 E81 E88 and much more
- ✓ high durability
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ S54 engines
- ✓ lightens 5.9 kg
- ✓ lower fuel consumption
- ✓ Rear axle adjustment suitable for BMW E36 E46 and Z4
- ✓ S50 & S52 engines
- ✓ lightens 5.6 kg
- ✓ lower fuel consumption
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ BMW E30, E36, Z3
- ✓ M30 M5 engine
- ✓ easy engine conversion
- ✓ 345x28 150342270 BMW E46 M3 CSL brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
- ✓ front axle
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ Length: 60cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ BMW, E36, Z3, M3, E36 8 MZ3, E36/8 Z3
- ✓ E46 M3 6-speed transmission from the BMW E46 M3
- ✓ simple transmission conversion