Vectra C Signum Camber Correction Plate Camber Adjustement Rear 1,0 Degree Positive
£45.48*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Plates for camber correction / adjustment on rear axle. Makes possible a camber correction / ajustement.
Thanks to our plates, you can modify the rear camber and give our vehicle 1,0° positive camber. Ideal for lowering the rear axle and correcting the angle defect if the tires are worn out only on one side.
Our plates are mounted between the pivot of the axle stub and the axle. Quick and easy assembly. The wheels are then moved 3mm outwards. The plates are manufactured with high precision
Its are made of steel and completely galvanized. Maximum anticorrosive protection and good optics.
Suitable for all Opel Vectra C and Signum models with hub and wheel bearing OE number: 1604 314
Delivery:
- 2x camber correction / adjustement plates, rear axle, right and leftt + 1,0°
Technical data:
Login
- Do I need longer screws or can the old ones remain in place?
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates with an angle of more than 2°, we recommend lightly sanding a washer and placing it under the screw head to ensure it remains flush with the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be required.
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.