You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Go to homepage
tuev sued logo
Made in germany
Shopping cart €0.00*

Modellwahl

#1
#2
#3
#5
Overview

Vehicle key number

Show all categories thin drive shaft Back

Thin drive shaft VW Golf 4 Bora Audi A3 Seat Leon Toledo Skoda Octavia joint set axle joint

Thin drive shaft VW Golf 4 Bora Audi A3 Seat Leon Toledo Skoda Octavia joint set axle joint

€197.18*

Prices incl. VAT plus shipping costs

8 Reviews
Available
Delivery by Wednesday, 08.05.2024 if you order within the next 18 Hours.
Repeated order: check settings carefully and change if necessary.
   maximum characters = 18, rest = 18
Price calculation
Pricebox
NameTitleSurcharge
Chassis number:  
Your Price:
% €197.18 * €197.18 * ( 0% saved )
rounded up to minimum price
Prices incl. VAT plus shipping costs
* Configuration is incomplete - please check it!
Product number: APA105
Weight: 7.5 kg
Einbauort: vorne

10mm shorter and thinner drive shaft for many VW, Skoda and Seat models. Absolutely necessary when lowering! The shaft is made of high-strength steel, 30mm thick and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines

Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering

It is important that when installing the new drive shaft, there is no overpressure in the sleeve. In our installation instructions you can see how you can prevent this (click here)

With the installation of our drive shaft, you avoid many modifications and you save time.

If you have the VW Golf MK4 Jubi, you also need the right wheel hubs so that you can install this thinner drive shaft. Article APA126 Click here

Technical data:

assembly side front axle right
length 796,0 mm
thread M20x1.5
drilling-Ø 10,2 mm
PCD-Ø 94 mm
joint diameter, gear side 108 mm
number of drill holes 6
external toothing wheel side 36
chassis for vehicles with low-profile chassis
joint diameter wheel side 98,0 mm

Delivery:

  • 1x fine thin drive / transmssion shaft, 1 cm shorter, inclusive axle joint, wheel hub and wheel bearing, for Golf Bora, Audi A3, Seat Leon, Toledo

Our drive shafts are registration-free and therefore do not have to be registered.

Einbauort: vorne

8 of 8 reviews

4.5 out of 5 stars

75%

0%

25%

0%

0%

Leave a review!

Share your experiences with other customers.

24 April 2023 13:26

Daniel R

Top Qualität. Alle benötigten Schrauben dabei. Leider keine unterlegplättchen für die Schrauben Getriebeseitig dabei.

9 April 2021 21:06

Max W

Perfeckte passgenauigkeit! Produkte sind Top und die Qualität auch ! Meinung zu allen drei Produkten Einfach nur Top !

6 August 2020 14:16

Dennis B

Verarbeitung könnte etwas besser sein aber im großen und ganze ein gutes Produkt vergleichsweise teuer aber ok

16 May 2020 07:57

Moritz Z

Sehr stabile dünne Antriebswelle! Perfekt für Tieffahrer.

22 August 2019 07:14

Marc L

Sehr zufrieden mit der Welle. Passgenau !! Bei Tieferlegungen ab 50mm genau die richtige Welle, um den Stabi nicht zu berühren !!Problem gelöst. Top

27 January 2019 13:40

Thorsten M

Es hat alles gepasst. Guter und schneller Service.

3 January 2019 11:04

Vanessa T

Artikel wurde schnell geliefert und entspricht den Erwartungen meines Freundes. Über das Ergebnis vom Einbau kann ich leider noch nichts sagen, da er im Moment keine Zeit zum Einbau hat. War auf jeden Fall ein gutes Weihnachtsgeschenk

24 April 2018 21:15

Shasa J

Passgenau und das Getriebe ist nicht mehr so belastet

  • What exactly is the point of having a shorter driveshaft?

  • As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.

  • Do reinforced driveshafts also have reinforced ball joints ?

  • The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.

  • Why are two bags of grease included in the delivery?

  • The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done. 

  • Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?

  • We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.

Passendes Zubehör

6 Speed Manual Gearbox Conversion Kit 02M 4motion VR6 R32 Golf MK1 2 3 4 Turbo
6 Speed Manual Gearbox Conversion Kit 02M 4motion VR6 R32 Golf MK1 2 3 4 Turbo
6 speed 4Motion 4WD gearbox kit to convert into a 2WD front-wheel drive. With our kit, the 6 speed 02M gearbox can be installed on any 2WD front-wheel drive vehicle. The 6 speed gearbox can be easily coupled with all current VW VR6 engines such as 1.8T 16V G60. It is significantly more stable than 02A other 02J 5 speed gearbox.The following drive shafts are required for this purpose:  For Golf 4 drive shaft left click here  For Golf 4 drive shaft right click here For Golf 3 Plus axle click here For Golf 2 3 narrow click here For Golf 1 click here Function: The transfer box is removed and instead our plate is fixed with screws to the 4 mounting points of the transfer box. The oil lines are closed with the seals / gaskets delivered by us. Assembly advice: So that the O-rings hold effectively during the assembly, simply apply a little grease to the grooves provided for this purpose. Required components: 1x short drive shaft flange, reference: 02M 409 356 A 1x seal / gasket 02M 409 189 This is definitely the best and simplest solution to convert the 02M 6 speed gearbox into 2-wheel drive. The other advantage is that this system can be restored at any time to the original state, because nothing has been modified on the gearbox or on the mounting parts. Delivery: 1x plate made of aluminium  3x O-rings to close the oil lines 4x mounting screws Installation instructions

€112.08*
Wheel Offset Plate Rear Axle Lowering VW Golf 4 Bora Jetta Audi A3 8L TT 8N Leon Toledo Octavia
Wheel Offset Plate Rear Axle Lowering VW Golf 4 Bora Jetta Audi A3 8L TT 8N Leon Toledo Octavia
Rear axle, wheel offset plates on low profile vehicles. By lowering the vehicle, the axle is no longer in the middle of the wheel house. It is therefore possible that the wheel touches the wheel house. It also affects optics and directional stability.Thanks to our offset plates, which are installed between the axle support and the body, the axle and the wheel are again in the middle of the wheel house. Suitable for the following vehicles: Audi A3 8L Audi TT 8N Seat Leon Seat Toledo 1M2 Skoda Octavia 1U VW Golf MK4 VW Bora/Jetta mk4 Delivery: 2x rear axle wheel offset plates for the mentioned models complete required high strength screw material

€181.29*
Wheel Bearing Kit Wheel Hub Front Axle both Side Golf MK4 Audi A3
Wheel Bearing Kit Wheel Hub Front Axle both Side Golf MK4 Audi A3
Wheel hub with wheel bearing kit, both sides, front axle. Suitable for the following vehicles: Audi A3 1.8 T quattro Audi TT 3.2 VR6 quattro VW Golf  MK4 1.9 TDI 4motion VW Golf MK4 2.8 V6 4motion Reference to compare: Audi: 1J0 407 613B; 1J0 407 613C; 1J0 407 613G  VW: 1J0 407 613B; 1J0 407 613C; 1J0 407 613G; 1J0 407 613H; 1J0407615G  Delivery: 1x wheel hub, front axle 1x wheel bearing kit, front axle

€71.47*
Conversion Kit Drive Shaft Transmission Shaft VW Golf MK4 GTI 1.8T Jubi 6-Speed 02M Lowering
Conversion Kit Drive Shaft Transmission Shaft VW Golf MK4 GTI 1.8T Jubi 6-Speed 02M Lowering
Fine thin drive / transmission shaft (10 mm shorter) with corresponding wheel hubs and wheel bearings for Golf MK4 GTI, Golf MK4 1.8 T Jubi  6-speed 02M 02Q gearbox. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here). Technical data: assembly side front axle right length 796,0 mm thread M20x1.5 drilling-Ø 10,2 mm PCD-Ø 94 mm joint diameter, gear side 108 mm number of drill holes 6 external toothing wheel side 36 chassis for vehicles with low-profile chassis joint diameter wheel side 98,0 mm Delivery: 1x fine thin drive / transmssion shaft, 1 cm shorter, inclusive axle joint, wheel hub and wheel bearing, for Golf MK4 GTI, Golf MK4 1.8 T Jubi 6-speed gearbox Our drive shafts are registration-free and therefore do not have to be registered.

€276.73*
Details
Thin Short Drive Shaft Left VW Golf MK4 Bora Audi A3 S3 1,9TDI 1,8T Axle Joints
Thin Short Drive Shaft Left VW Golf MK4 Bora Audi A3 S3 1,9TDI 1,8T Axle Joints
Fine thin drive shaft for VW Golf MK4 Bora Audi A3 1,9TDI 6-speed. Absolutely necessary when lowering! The shaft is made of high-strength steel (26mm thick) tand manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines. Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).Please inform your customers that they should grease the axle boot to give a longer use life. Important!! Our short and thin drive shaft is only suitable if the dimension from the wheel center to the original fender edge is 31.5cm or smaller. If this distance is higher, the shaft is too short for your vehicle. This is how you measure the distance from the fender edge to the wheel center: Technical data: assembly side front axle left length 508,0 mm external toothing wheel side 36 chassis for vehicles with low-profile chassis Delivery: 1x fine thin drive shaft for VW Golf MK4 Bora Audi A3 1,9TDI 6-speed Our drive shafts are registration-free and therefore do not have to be registered.

€205.68*
Details
You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
test
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT