Does the steel braided line also fit other vehicles?

Yes – basically the braided steel line can also fit many other vehicles if the connection data matches. In practice, many manufacturers use very similar thread sizes for brake line fittings, so using them across different models is often possible.What really mattersTo ensure the line fits securely and tightly, you need to match three main points:Thread size / connectionThe key factor is what thread your vehicle has at the connection points (e.g., at the fixed line connection or brake caliper).This thread size must match the fittings of the line.Sealing surface (concave or convex)Often, the problem is not the thread, but the sealing shape on the counterpart:concave (valley) orconvex (hill)Our fittings are so-called “hybrid” connections. This means: Each connection is designed to reliably seal with both concave and convex sealing surfaces. This makes the line significantly more versatile.Length and routingYou need to determine the required length suitable for your vehicle (ideally as described above: fully extend, simulate routing, check steering).Only if the line is long enough and can be routed cleanly is it truly suitable.How to quickly check if it fitsDetermine the thread size on the vehicle (and compare it with the data of the line)Measure the line lengthCheck the technical data in the product description – there you will find all the details about the line and the connections.

Two lens gaskets were supplied with the Steelflex lines. Where exactly are these installed?

The 2 lens seals are not automatically always installed, but only when they are needed to compensate for the sealing cone on the respective counterpart. Background: Depending on the vehicle/connection, there are different flaring or sealing shapes – and that's exactly why the lenses are always provided as a precaution.What are the lens seals for?They serve as a compensating piece when the cone on the connection (counterpart) does not perfectly match the steel braided hose. This ensures that the connection seals cleanly.Where are they used?If needed, the lens seals are placed directly into the connection with internal thread – that is, into the “female” fitting on the vehicle/distributor/brake caliper, before you screw in the hose.The hose presses the lens into its seat when tightened, thus creating the seal.When do you need them – and when not?F flare (DIN/ISO cone, usually fits):→ Lens seals are not needed.The hose usually seals directly over the matching cone here.E flare:→ Lens seals must be used.Simply place it into the internal thread, then screw in the hose and tighten as usual.Installation noteThe installation direction does not matter – you can install the lens either way, it makes no difference.

Stahlflex Bremsleitung Barkas Vorderachse

Name: Stahlflex Bremsleitung Barkas Vorderachse
SKU: SF145
Price: 90.99 GBP
Availability: InStock

£90.99*

Prices incl. VAT plus shipping costs

Available

Product number: SF145

Delivery by Friday, 28.08.2026 if you order within the next 6 Hours.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Stahlflex Bremsleitung mit Teilegutachten für den Umbau auf Stahlflexleitungen an der Vorderachse des VW Barkas

Für die Vorderachse von folgenden Modellen passend:

Barkas Bus
Barkas Kasten

Vorteile gegenüber Original Bremsleitungen:

kein Druckverlust bei Bremsbetätigung, dadurch spürbar exakter Druckpunkt
einfache Montage, die Originalleitung wird einfach durch die Stahlflexleitung ersetzt
kein Aufquellen wie bei Gummileitungen
Kostenersparnis, da Stahlflexleitungen nahezu unbegrenzt haltbar sind und nicht alle 3-5 Jahre ausgetauscht werden müssen
kürzerer Bremsweg
Mardersicherheit
inkl. Teilegutachten zur problemlosen Eintragung
klasse Optik

Technische Daten:

Länge:29 cm
Anschluss 1 M12x1 Innengewinde gerade
Anschluss 2 M10x1 Außengewinde gerade
Bördelung 90° unsere Fittings sind sogenannte Zwitter, das bedeutet, jeder Anschluss passt egal, ob konkav und konvex

Lieferumfang:

2x Stahlflex Bremsleitungen für den Barkas
inkl. Teilegutachten zur problemlosen Eintragung

Wir fertigen auch nach Wunschmaß. Mit unserem Stahlflexleitungenkonfigurator (hier klicken), kannst du dir deine Stahlflexbremsleitung, nach deinen Wünschen konfigurieren. (Länge, Farbe und Anschlüsse)

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Connection 1: M12x1 Innengewinde

Connection 2: M10x1 Aussengewinde

length: 29

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

No reviews found. Share your insights with others.