Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Renault Clio 3 4 Modus Captur Kangoo Dacia Dokker Logan Bremsanlage Bremssattel Adapter 300x24

  • ✓ 300x24 7701207897 Renault Scenic 2 brake disc
  • ✓ 4-piston 7701066288 / 7701066289 brake caliper
  • ✓ front axle

Bremssattel Adapter für die Renault und Dacia Baureihe auf die Renault Clio RS / Megan RS Bremssättel in Verbindung mit den original Renault Scenic 2 Bremsscheiben 300x24.

Die Adapter passen für folgende Fahrzeuge:

Renault:

  • Clio 3
  • Clio 4
  • Modus
  • Captur
  • Kangoo 2 ( 4-Loch )
  • Zoe

Dacia:

  • Dokker
  • Lodgy
  • Sandero
  • Logan

Vorteile dieser Bremsanlage:

  • Durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
  • Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
  • Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren.

Benötigte Komponenten:

  • Bremssättel vom Clio 3 RS Bremssattel links Teile Nr: 7701066288 Bremssattel rechts Teile Nr: 7701066289
  • Bremsscheiben vom Renault Scenic 2 300x24 mm Teilenummer 7701207897
  • Um den Adapter am Achschenkel zu besfestigen können die original Scharauben verwendet werden

Lieferumfang:

  • 2x Bremssattel Adapter
  • hochfeste Montageschrauben
  • Materialzertifikat

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 100mm
Lochabstand Bremssattel : 130mm
Einbauort: vorne
Lochabstand Achsschenkel: 100mm
Lochabstand Bremssattel : 130mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
2x brake discs Renault Scenic II 2.0 16V Turbo 1.9 dCi Zimmermann 300x24 470.2423.20
  • ✓ 300x24
  • ✓ 61mm centering
  • ✓ 44mm height

€117.49*
Item number: ZIM181

Average rating of 4 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1
2x brake discs Renault Scenic II 2.0 16V Turbo 1.9 dCi Zimmermann sports 300x24 470.2423.52
  • ✓ 300x24
  • ✓ 61mm centering
  • ✓ 44mm height

€189.63*
Item number: ZIM182