Passat 3BG Skoda Superb Audi A6 C5 4B Rear axle Brake disc system Brake caliper adapter Conversion S6 4F 330x22mm
- ✓ 330x22 4F0615601F 240122-02231 Audi A6 brake disc
- ✓ 1-piston 4B0615423 Audi Quattro S6 / Passat W8 V8 brake caliper
- ✓ rear axle
€203.63*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for rear axle brake system to fix brake discs typ S6 4f diameter 330x22mm in combination with Vw/Audi standard brake calipers. Tailor-made for Audi /VW vehicles with front-wheel drive and serial brake discs typ 269x22mm. Construction year: From ’96 on.
- AUDI A6 (4B, C5)
- AUDI A6 Avant (4B, C5)
- VW Passat (3B + 3BG )
- VW Passat Variant (3B + 3BG )
- Skoda Superb (3U4)
Required components
- Audi VW Quattro brake calipers from e.g. Audi Quattro S6, Passat W8 V8 VAG: 4B0 615 423; 4B0 615 424 (originally installed with the 269x22 brake disc)
- Brake discs typ A6 4f 330x22 mm Nr.OE-VAG: 4F0 615 601 F (ATE Nr: 24.0122-0223.1 )
Advantages of this braking system:
- Best deceleration values Significantly better perfomance than the standard brake system.
- Components come from series production by VW/Audi
- The registration for public road use should be no problem with correct and complete execution of the work.
Scope of delivery:
- 2x brake caliper adapter completely galvanized (see photo)
- Certificate of material
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 330x22
- ✓ 68mm centering
- ✓ 49mm height
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 330x22
- ✓ 68mm centering
- ✓ 49mm height
- ✓ 330x22
- ✓ 68mm centering
- ✓ 49mm height