Mercedes Benz C63 W205 W212 Bremsanlage 390x36 AMG Bremssattel Adapter 6-Kolben
- ✓ 390x36 A2314211812 Mercedes AMG C63 S brake disc
- ✓ 6-piston A2044219998 / A2044219798 Mercedes C 63 AMG brake caliper
- ✓ front axle
€147.27*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssattel Adapter für die Vorderachse des Mercedes Benz C63 W205 und W212 E63 AMG um die Mercedes CLS63 AMG Bremsscheibe 390x36 in Verbindung mit den original verbauten Mercedes 6-Kolben Bremssättel zu fahren.
Der Adapter passt mit beiden originalen Bremssätteln, welche beim Fahrzeug verbaut worden sind. Bis zum Baujahr 08/2017 wurde der Akebonobremssattel verbaut, ab dem Baujahr 09/2017 wurde dann standardmäßig der Brembobremssatttel des C 63 AMG (205) verbaut.
Endlich ein Adapter um von der original 360mm auf die 390mm Bremsscheibe vom AMG upgraden zu können. Da man die originalen Halter nicht einzeln bekommt, sind diese extrem teuer. Mit unserem Adapterkit kannst du die 390mm Scheibe Plug and Play verbauen.
Vorteile dieser Bremsanlage:
- Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben
- einfache Montage
- ein Muss bei Leistungssteigerung
- Materialzertifikat wird mitgeliefert
- einfach wieder in original Zustand rückrüstbar
Benötigte Komponenten:
- Mercedes C 63 AMG (W205) 6-Kolben Bremssättel Teile Nr. A2044219998 / A204 421 97 98 ( Brembo: 20828205 / 20828206 )
- Bremsscheibe vom Mercedes CLS 63 von der Vorderachse in 390x36mm Teilenummer: A2304211212
- Bremsscheibe vom Mercedes AMG C63 S (S205) von der Vorderachse in 390x36mm Teilenummer: A2314211812
Lieferumfang:
- 2x Bremssattel Adapter für Mercedes Benz W205 C63 W212
- inklusive hochfestes Schraubenmaterial
- Materialzertifikat
- Einbauanleitung
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J brake caliper
- ✓ front axle
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
