We are very sorry that you are having a problem with one of our brake caliper adapters.
Here we have written down the most common errors when installing our Epytec adapters and linked them here. Click here and solve your installation problem. If your problem is not there or if it does not help you, then we ask you to give us the following information so that we can check what the error is:
Important!!!
Please fill out everything for us, otherwise we will not have all the information and will therefore not be able to give you a clear statementand may not be able to help, as these are the basics we need to be able to help you quickly find the problem.
Vehicle data:
Make / Model :_____________________
Platform / Type :_____________________
Construction year :__________________________
Installed brake disc:Part number :______________________
From which vehicle :_______________
Installed caliper:Part number: ______________________
From which vehicle :_______________
If possible, please also send us photos where you can see the problems.
More information on brake problems:
We also ask you to check the brake system to see whether the error is on both sides, i.e. left and right, as we have already noticed massive differences such as replica steering knuckles, etc.
If it is the case for you that the brake caliper does not run exactly in the middle over the disc, it may have to do with the tolerances on the axles. For this we have extra sockets in the program, so that this play can be compensated.
You can easily order them directly here:https://epytec.de/en/equipment/screws-bushs-accessories/
What also happens again and again is that the locking bolts in the calipers that hold the brake pads were pressed in to different extents. Please check that as well. If these are not correct, you can simply push them outwards with a screw clamp or something similar.