Golf Mk1 Caddy Brake Caliper Adapter G60 S2 Brake System
€103.28*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne Zwischenhandel, du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Brake caliper adapter, front axle, to install on models Golf MK1, Golf MK1 Cabrio, Caddy 14d, Jetta 1, Scirocco the 280mm brake disc of Golf MK2 G60, combined with the Audi S2 brake caliper.
These adapters were developed by us NEW.
Extra for the S2 Girling 60 brake calipers!
Required components:
- brake discs front 280mm diameter Golf MK2 G60 (including Syncro), PassatG60 (including Syncro), CorradoG60
- Brake calipers from the S2 Girling 60, part number: 895 615 124 A / 895 615 123 A
- Brake caliper carrier, part number: 447 615 125
Advantages of this brake system:
- even more powerful braking than with the conversion to G60 brake by double piston brake
- still usable with 15 inch. Wheel offset must be tested according to the rim. Spacers plates may have to be installed
- a registration for public traffic should not be a problem, provided it has been correctly and completely installed.
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
Delivery:
- 2x brake caliper adapters for Golf1, Golf 1Cabrio, Caddy 14d, Jetta 1, Scirocco
- 1x installation instructions with detailed picture material
- 1x material certificate
- Stress analysis for registration
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: