Flywheel Kit VW Polo Lupo 9N 1,6l 16V 5-speed 6-speed 220mm Flywheel Clutch Pressure Plate Organic
- ✓ 1.6l 16V 5 and 6 speed engine
- ✓ 220mm clutch
- ✓ 520NM torque
£749.02*
- Express shopping
- Save your data and settings
- Order overview and shipping information
- Manage your newsletter subscription
- 19 Jahre Expertenwissen
Product information "Flywheel Kit VW Polo Lupo 9N 1,6l 16V 5-speed 6-speed 220mm Flywheel Clutch Pressure Plate Organic"
Clutch kit for VW Polo Lupo 9N 1,6l 16V 5 and 6-speed
Consists of:
- lightened high strength chrome molybdenum flywheel EPYTEC
- rigid, sinterpad clutch disc SACHS
- clutch pressure plate, reinforced design SACHS
For the following engine:
- 1,6l 16V 5 and 6-speed
Advantages of our clutch kit with lightened flywheel
- our flywheel weighs only 3.3 kg, the standard wheel over 5.5 kg
- exactly identical in construction to the series components, therefore easy replacement possible
- it is not necessary to send us the original engine flywheel
- higher contact pressure and less abrasion of the pressure plate
- all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors
- significantly better acceleration due to less inertia
- higher speeds possible
- the engine runs faster
- More direct response behaviour
- suitable for motorsports, racing or serial vehicles
- lower fuel consumption
- significant reduction of the turbo lag
- precision balancing, bearings are less affected
- including ring gear
- suitable for either a standard clutch or a high-performance clutch
- made in Germany
Advantages of the torsion spring clutch disc with organic performance clutch lining and the reinforced pressure plate
- starting behavior similar to series
- significantly higher transmittable torque
- the torsional damping achieves a higher impact moment
- better thermal resilience compared to organic friction coating/lining
- longer lifetime
- less lift
- higher pressing force
- higher speeds possible
Areas of application:
- series and road vehicles
- chip tuning, turbo and compressor conversions
- vehicles with maximum loads
- vehicles with trailer
- 1/4 mile race
- circuit racing (e.g. endurance racing, motor sport, cross)
- rallies (e.g. category N)
- hill climb, slalom, drift
Technical data:
- transmittable torque[Nm]: 520
- weight of the lightened single-mass flywheel: 3,3 Kg
Delivery:
- 1x lightened high strength chrome molybdenum flywheel EPYTEC
- 1x spring organic clutch disc SACHS
- 1x clutch pressure plate, reinforced design SACHS
- 1x release bearing
Login
| Motor | Motorcode |
|---|---|
| 1.6 16V | 9A|105PS(77KW) |
| 1.6 16V | 9N|105PS(77KW) |
| Motor | Motorcode |
|---|---|
| 1.6 GTI | 60|125PS(92KW) |
| 1.6 GTI | 6E1|125PS(92KW) |
| 1.6 GTI | 6X1|125PS(92KW) |
| Motor | Motorcode |
|---|---|
| 1.6 16V | 6L1|105PS(77KW) |
| Motor | Motorcode |
|---|---|
| 1.6 16V | 9A|105PS(77KW) |
| 1.6 16V | 9N|105PS(77KW) |
| Motor | Motorcode |
|---|---|
| 1.6 GTI | 60|125PS(92KW) |
| 1.6 GTI | 6E1|125PS(92KW) |
| 1.6 GTI | 6X1|125PS(92KW) |
| Motor | Motorcode |
|---|---|
| 1.6 16V | 6L1|105PS(77KW) |
- ✓ VW Polo Lupo 9N 1.6l 16V engine
- ✓ 220mm clutch
- ✓ NM torque approx. 30% via standard clutch
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 4, Audi A3, Seat Leon, Skoda Oktavia
- ✓ 1J0721261D
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ Length: 52cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Gearbox/engine mount cable
- ✓ Lupo, Polo 6N 1.8T
- ✓ 02A/02J gearbox
- ✓ No more play
- ✓ high-quality aluminium
- ✓ Golf 4 Audi A3 Seat with cable shift
- ✓ 280x22 G60 535615301
- ✓ 4-piston 986351421 986351422 996351.421 996351422 brake caliper
- ✓ front axle Golf 2 3 Jetta Corrado
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ negative camber
- ✓ 6mm thickness
- ✓ Suitable for VW Polo 6R, Audi A1, Seat Ibiza, Skoda Fabia
- ✓ VW Polo 6R Golf Audi Audi A1 Seat Ibiza Skoda Fabia
- ✓ Better directional stability
- ✓ Easy installation
- ✓ camber adjustement plates, rear axle, in order to adjust camber and track. Thanks to these plates you can change the camber of the rear wheels negatively 1.0 degree
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ front axle
- ✓ Hydraulic clutch
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
Passendes Zubehör zusammen kaufen und sparen
- ✓ VW Polo Lupo 9N 1.6l 16V engine
- ✓ 220mm clutch
- ✓ NM torque approx. 30% via standard clutch
- ✓ For Golf 2 Corrado
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:6Q1723503K
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 4, Audi A3, Seat Leon, Skoda Oktavia
- ✓ 1J0721261D
- ✓ Tie rod end M14x1.5
- ✓ VW, Audi, Golf 1, Golf 2, Golf 3, Corrado,...
- ✓ 100% perfect fit
- ✓ Length: 52cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Gearbox/engine mount cable
- ✓ Lupo, Polo 6N 1.8T
- ✓ 02A/02J gearbox
- ✓ No more play
- ✓ high-quality aluminium
- ✓ Golf 4 Audi A3 Seat with cable shift
- ✓ 280x22 G60 535615301
- ✓ 4-piston 986351421 986351422 996351.421 996351422 brake caliper
- ✓ front axle Golf 2 3 Jetta Corrado
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ negative camber
- ✓ 6mm thickness
- ✓ Suitable for VW Polo 6R, Audi A1, Seat Ibiza, Skoda Fabia
- ✓ VW Polo 6R Golf Audi Audi A1 Seat Ibiza Skoda Fabia
- ✓ Better directional stability
- ✓ Easy installation
- ✓ camber adjustement plates, rear axle, in order to adjust camber and track. Thanks to these plates you can change the camber of the rear wheels negatively 1.0 degree
- ✓ 323x28 1ML615301 Seat Leon Cupra R brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ front axle
- ✓ Hydraulic clutch
- ✓ Golf 2, 3, Corrado, Jetta, Passat 35i
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation