Bremssatteladapter BMW 1er 2er 3er 4er F20 F21 F23 F31 F32 F33 Cabrio Coupe BMW M2 M3 400x36 Bremsscheibe 6 Kolben Bremssattel Tuning Adapter
- ✓ 400x36 34118072017 / 34118072018 BMW M2 brake disc
- ✓ 6-piston 34117845747 / 34117845748 BMW F10 M5 brake caliper
- ✓ front axle
€226.92*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssattel Adapter für die Vorderachse des 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36 um die BMW F10 M5 6-Kolben Bremssättel in Verbindung mit den 400x36mm BMW M2 Bremsscheiben zu fahren.
Die BMW F10 M5 6-Kolben Bremssättel werden einfach anstelle des original Sattels mithilfe unseres Tuning-Adapters an die original Achsaufnahme geschraubt.
Vorteile dieser Bremsanlage:
- Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben
- einfache Montage
- ein Muss bei Leistungssteigerung
- Materialzertifikat wird mitgeliefert
- einfach wieder in original Zustand rückrüstbar
Benötigte Komponenten:
- BMW F10 M5 6-Kolben Bremssättel Teile Nr. Bremssattel links: 34117845747 / Bremssattel rechts: 34117845748
- Bremsscheibe vom BMW M2 400x36mm Teilenummer: Bremsscheibe links: 34118072017 / Bremsscheibe rechts: 34118072018
Lieferumfang:
- 2x Bremssattel Adapter für 1er, 2er BMW F20, F21, F22 und F23, sowie der 3er und 4er Baureihe F30, F31, F32, F33, F34, F36
- passender Schraubensatz
- Materialzertifikat
- KFZ Schein Eintragung
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track