BMW Z1 E30 Brake Caliper Adapter E34 540i Brake Discs 312x25
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 1-piston 34111160365 (casting number 243) 34111160363/364 casting number 60/28/302 BMW E34 540i brake caliper
- ✓ front axle
€159.75*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on front axle from BMW E30 for conversion to the large brake system from BMW E34 540i, combined with Audi S3 brake discs 312 x 25mm.
Required components:
- brake calipers: BMW E34 540i with support / bracket and brake pads
- brake discs: Audi S3 (8L) / Golf 4 GTI 312x25mm reference 8N0 615 301 A
- brake disc PCD habe to be modified to 4x100 (service available from EPYTEC
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Delivery:
- 2x brake caliper adapters (see picture)
- high-strength screw set
- material certificate
Rims: at least 17 inch.
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
28 June 2018 06:20
Edaurd S
Alles Bestens, sehr gerne wieder. Gut das es solche Firmen wie euch gibt
9 September 2021 16:22
Christian S
Weil alles super geklappt hat Die Muttern haben gefehlt, wurden aber sofort nachgeliefert Meinen Freunden Passt soweit Preis/Leistung ist super Nein, ich schraube schon seit 35 Jahren Wie gewünscht
18 April 2018 15:02
David E
Der Adapter passt soweit gut, jedoch könnte man vermeiden, dass man am Achsschenkel flexen muss. Der Adapter sieht hochwertig aus. Man könnte die Beschriftung auf die andere Seite machen sodass man sie im eingebauten Zustand lesen kann. Man könn
29 December 2019 23:45
Danny S
Das wichtigste, die Adapter passen! Zwei Punkte zur Verbesserung: - Gewinde im Adapter zur Befestigung am Radträger, statt der Schraube/Mutter Befestigung. Nur mit den mitgelieferten Schrauben wären die Adapter nicht verbaubar. Es fehlen die Muttern... - Gravur auf der Fzg Innenseite, so dass diese nach Verbau noch lesbar ist. Ich war noch nicht beim TÜV, aber ich nehme an, man wird das lesen wollen. Sonst ist doch kein Vergleich mit dem Material Gutachten möglich.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: