Big Red Porsche 944 924 996 Turbo Adapter Brake Caliper Adapter Brake Caliper Adapter
- ✓ 330x34 99635140902 / 99635141002 Porsche 944 / 924 brake disc
- ✓ 4-piston 996351429 / 996351430 The Big Red brake caliper
- ✓ front axle
€306.24*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Porsche caliper adapters for the transaxle series up to 190hp. With the caliper adapters you can drive the 330x34mm Porsche brake discs in conjunction with the large Porsche 996 Turbo brake.
Here it is important that the small brake and the narrow axle has been installed, which have a hole size of 76mm.
suitable for the following models with the narrow axles (76mm hole spacing):
- Porsche 944 up to 190 hp
- Porsche 924 up to 190 hp
Required components:
- Porsche brake caliper part number: 996.351.429 / 996.351.430 (Only 100% fit with the specified Porsche calipers)
- Brake discs: 330 x 34 mm
- Brake disc left VA
- Porsche reference number: 996 351 409 02, 996 351 409 03, 996 351 409 04
- Brake disc right VA
- Porsche reference number: 996 351 410 02, 996 351 410 03, 996 351 410 04
- Brake pad set VA
- Porsche reference number: 99635194910, 99635194911, 99635194912, 99735194902
- The wheel hub must be turned slightly (to size) so that the brake disc fits over it
Brake caliper holder are made of high strength steel alloy including material certificate.
Advantages:
- Extreme deceleration values also in conjunction with our rear axle brake system.
- By the material certificate included in the scope of supply, a registration can be made possible by individual acceptance even with series vehicles
- Directly suitable for the above mentioned models and therefore easily rebuildable to the original condition at any time.
- Our EPYTEC brake caliper adapters require no sending in of their series parts, no re-welding - re-milling or re-drilling.
Scope of delivery:
- 2x holder (see picture)
- Material Certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality