Audi VW Golf 5 A6 A3 S2 Adapter for brake calipers A8 Breaksystem adapter Holder for calipers 335x22
- ✓ 335x22 3D0615601 3D0615601C 4E0615601L Audi A8 brake disc
- ✓ 1-piston Girling 41 / 43 brake caliper
- ✓ front axle
€184.06*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount brake discs 335x22mm on the rear axle Audi A8 in connection with the original brake calipers.
Adapter is suitable for the following vehicles:
- VW Golf 5
- VW Jetta
- VW Passat, W8
- VW Touran
- Audi A4
- Audi A6
- Audi S2
- Audi A8
- AUDI 200 20V Turbo
Required components:
- Original Audi VW brake calipers Girling 41 or 43, Ideal A8, A8Q installed with original 280x22 brake discs
- Brake carrier with part number: 4D0 615 425 C, this is the carrier that is originally installed with the 280x22 brake disc
- A8 brake discs 335x22mm OE NR.3D0615601,3D0615601C,4E0615601L
Advantages of this brake system:
- Extreme deceleration values also in connection with our rear axle brake system
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Directly suitable for the above models and can therefore be restored to the original condition at any time without any problems
- Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling.
We also offer a suitable brake system for the front axle, see our shop
Scope of delivery:
- 2x brake caliper holder (see picture)
- materials certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 345x30 4D0615301B Audi S8 brake disc
- ✓ 4-piston 996351429 / 996351430 Porsche 996/GT3 brake caliper
- ✓ front axle
- ✓ Length: 20cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 335x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 335x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ Length: 17cm
- ✓ M10x1 straight inside
- ✓ M10x1 straight inside
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track