VW Scirocco Passat 3C B6 Audi Q3 TT Brake Caliper Adapter Audi A6 Brake Disc 356x22mm Porsche Panamera Caliper
- ✓ 356x22 4G8615601 Audi RS7 brake disc
- ✓ 4-piston 7P0615423 / 7P0615424 VW Touareg / Porsche Cayenne brake caliper
- ✓ rear axle
€335.97*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on models VW Passat 3C B6, Scirocco, Audi Q3, TT series with aluminum axle (manufacturer reference: 3C0 505 435 F) for conversion to the Porsche Panamera brake calipers
The conversion is combined with the 356x22 mm brake discs from Audi A6 4G.
The Porsche calipers are connected to the hydraulics of the vehicle and can thus develop an enormous braking force. However, since these have no handbrake functions, the rear Golf 7R brake caliper is also used as a handbrake caliper. The hydraulic connection is thereby closed with a blind plug / closure cap, thus this serves only as a hand brake caliper.
Adapters are suitable for the following VW and Seat models with aluminum axle 3C0 505 435 F:
- VW Passat 3C B6
- VW Eos
- VW Scirocco
- VW Tiguan
- VW Sharan
- Audi Q3
- Audi TT / TT Roadster
- Seat Alhambra
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- better performance
- supplied material certificate
Required components:
- brake caliper: VW Touareg / Porsche Cayenne, Panamera from the rear axle that was originally installed with 330x28mm brake discs. Reference 7P0.615423 / 7P0.615424 ; reference Porsche: 958.352.423.25 / 958.352.424.25
- handbrake calipers with mounting bracket from Golf 7R, reference 8V0 615 424 B / 8V0 615 423 B
- brake disc: original Audi A6 4G 356x22 mm, reference 4H0615601F
- the upper screwing point of the anchor plate has to be slightly modified (see picture)
- perforated wave brake disc from the Audi RS7 356x22 mm, reference 4G8.615.601
Info:
If you want to drive with a perforated brake disc, the Wave brake disc from the Audi RS7 with 356x22mm (reference: 4G8.615.601) also fits, since the Audi S6 S7 S8 brake disc is not perforated. The brake discs are otherwise exactly identical in terms of dimensions.
Delivery:
- 2x brake caliper adapters for aluminum rear axle VW Passat 3C B6, Scirocco, Audi Q3, TT, etc.
- 2x centric rings
- high strength mounting screws
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: