You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Go to homepage
Shopping cart €0.00*

Modellwahl

#1
#2
#3
#5
Overview

Vehicle key number

Show all categories thin drive shaft Back

Thin drive shaft left VW Golf 4 Bora 1.8T V5 Audi A3 8L 108er Flange

Thin drive shaft left VW Golf 4 Bora 1.8T V5 Audi A3 8L 108er Flange

€189.89*

Prices incl. VAT plus shipping costs

Available
Delivery by Tuesday, 30.04.2024 if you order within the next 20 Hours.
Repeated order: check settings carefully and change if necessary.
   maximum characters = 18, rest = 18
Price calculation
Pricebox
NameTitleSurcharge
Chassis number:  
Your Price:
% €189.89 * €189.89 * ( 0% saved )
rounded up to minimum price
Prices incl. VAT plus shipping costs
* Configuration is incomplete - please check it!
Product number: APA264
Weight: 13.6 kg
Thin drive shaft for many VW Golf 4, Bora 1.8T V5 and Audi A3 models with 108 mm flange. Absolutely essential if you want to lower your vehicle extremely! The shafts are 28mm thick, are made from one piece of high-strength steel and are solid shafts, making them suitable for higher performance engines.

With our significantly thinner and extremely stable drive shaft, you can avoid the common problem of the drive shaft touching the body when the vehicle is lowered.

It is important that no excess pressure is created in the sleeve when installing the new drive shaft. You can see how to prevent this in our installation instructions (click here)

Installing the thinner drive shaft saves you having to rework the body. This saves you time and nerves.

Important!! Our short and thin drive shaft is only suitable if the dimension from the centre of the wheel to the original mudguard edge is 32cm

This is how you measure the distance from the edge of the mudguard to the centre of the wheel:

/814-165769-bremssatteladapapter-vw-t5-t6-bus-adapter-365x34-bremsscheibe-audi-rs5-r8-bremssattel-8-kolben--13-.jpeg


Scope of delivery:

  • 1x thin drive shaft for VW Golf 4, Bora 1.8T V5, Audi A3 8L with 108 mm flange

Our drive shafts are registration-free and therefore do not need to be registered.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

  • What exactly is the point of having a shorter driveshaft?

  • As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.

  • Do reinforced driveshafts also have reinforced ball joints ?

  • The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.

  • Why are two bags of grease included in the delivery?

  • The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done. 

  • Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?

  • We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.

Passendes Zubehör

Thin Short Drive Shaft Right VW Golf MK4 Bora 1.8T V5 Audi A3 8L 108er
Thin Short Drive Shaft Right VW Golf MK4 Bora 1.8T V5 Audi A3 8L 108er
  • ✓ short thin drive shaft right for VW Golf 4MK, Bora 1.8T V5, Audi A3, 8L mit 108er flange

€276.73*
Artikelnummer: APA168
Details
You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
test
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT