Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Opel Omega Porsche Brake Caliper Adapter Brake Audi A8 Brake Disc Front Axle

  • ✓ 323x30 3D061301G Audi A8 brake discs
  • ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
  • ✓ front axle

Brake caliper adapter, front axle, on models e.g. Opel Omega B, for conversion to the brake discs 323 x 30mm from Audi A8, combined with  the Porsche Boxster S and 996 brake calipers (996.351.425 or 426).

Can be used without modifications on all Opels with a standard 5x110mm bolt / pitch circle such as Omega A B.

Otherwise with wheel hub conversion to 5x110 bolt / ptich circle on all Opel models e.g. Astra, Calibra, Kadett & Vectra can be mounted directly on the suspension strut.

Required components:

  • brake caliper: Porsche Boxter S, reference left 996.351.425 right 996.351.426
  • brake disc: Audi A8 323x30mm, reference 3D0 615 301 G
  • hub diameter of the brake discs can be modified from 68mm to 70mm (can also be done by EPYTEC)

Advantages of this brake system:

  • high deceleration, also in conjunction with our rear axle braking system
  • thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
  • directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
  • our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling

Delivery:

  • 2x brake caliper adapters for Opel Omega with Audi A8 brake discs and Porsche 996 brake calipers
  • material certificate

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 76mm
Lochabstand Bremssattel : 130mm
Einbauort: vorne
Lochabstand Achsschenkel: 76mm
Lochabstand Bremssattel : 130mm

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


23 March 2023 07:54

Review with rating of 5 out of 5 stars

Marcel A

Past genau, gutte verarbeitung

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
EBC Brake Pads Redstuff Rear Porsche 911 Boxster Cayman 3.4 Carrera
  • ✓ Registration-free
  • ✓ Redstuff ceramic covering
  • ✓ temperature up to 750°C

€213.97*
Item number: DP31514C

Average rating of 5 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1
EBC brake discs front axle 323x30 Premium Disc Audi A8 A6 Avant 2.5 TDI 2.8 quattro
  • ✓ 323x30
  • ✓ 68mm centering
  • ✓ 59mm height

€313.54*
Item number: D1012
EBC brake discs 323x30 Turbo Groove front axle Audi A8 A6 Avant 2.5 TDI 2.8 quattro
  • ✓ 323x30
  • ✓ 68mm centering
  • ✓ 59mm height

€436.51*
Item number: GD1012
EBC brake discs 323x30 Black-Dash front axle Audi A8 A6 Avant 2.5 TDI 2.8 quattro
  • ✓ 323x30
  • ✓ 68mm centering
  • ✓ 59mm height

€423.62*
Item number: USR1012