Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Opel Omega B 3.0 2.5 V6 Caravan Brake Caliper Adapter Brake Disc Audi RS6 390x36mm 6-piston Brake Caliper Mercedes SL63 AMG

  • ✓ 390x36 4GO615301E Audi RS6 brake disc
  • ✓ 6-piston A2314212698 Mercedes S / SL63 / 65 brake caliper
  • ✓ front axle

Brake caliper adapter, front axle, on models Opel Omega B V6, for conversion to the Mercedes Benz GLS AMG 6-piston brake calipers, combined with the Wave brake discs 390x36mm from the Audi RS6

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • easy assembly
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • brake caliper: Mercedes S / SL63 / 65 AMG 6-piston, reference A2314212698 / Brembo reference 20.A495.04
  • brake disc: Wave 390x36mm from Audi RS6, reference 4GO.615.301.E

Delivery:

  • 2x brake caliper adapters for Opel Omega B V6 3.0 2.5 Omega B Caravan
  • including high-strength screw material
  • material certificate
  • installation instructions

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 76mm
Lochabstand Bremssattel : 256mm
Einbauort: vorne
Lochabstand Achsschenkel: 76mm
Lochabstand Bremssattel : 256mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Average rating of 5 out of 5 stars

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ optimized paste for brake systems
  • ✓ correct viscosity
  • ✓ no squeaking

€2.46*
Item number: LUBE001

Average rating of 4 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1
500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ Racing brake fluid
  • ✓ Reduction in brake fading
  • ✓ improved pedal feel

€32.11*
Item number: BF307
PCD Adapter Spacer Custom-Made Manufacturing
  • ✓ to configure yourself
  • ✓ with TÜV certificate
  • ✓ best quality

€96.00*
Item number: LK1

Average rating of 5 out of 5 stars

500ml DOT 4 Bremsflüssigkeit Brembo Brake Fluid (1L = 23,98€) Bremsanlage umbau
  • ✓ Significantly higher boiling point
  • ✓ Better pedal feel
  • ✓ Suitable for the race track

€11.10*
Item number: 1210