Gesucht nach VW | Vento | 1.6 | 1H2
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ conversion kit to hydraulic clutch Golf Mk4
- ✓ suitable for VW Golf Mk3, Vento, Golf Mk4 Cabrio
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ accelerator pedal adapter for conversion from the original Golf MK3 pedals to Golf MK7 gas pedals
- ✓ for all 1.4l, 1.6l 16V engines with 200mm clutch
- ✓ e.g. VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
- ✓ Total weight: 3.8 kg / Savings compared to the original: 2.5 kg
- ✓ for vehicles with 5-speed gearbox
- ✓ clutch master cylinder for VW Golf MK3, Golf MK4 Cabrio Polo Caddy, etc.
- ✓ manufacturer number: 1H1721401, 1H1721401B, 1H1721401A
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ 1x steel strut bar / brace for rear axle on models VW Vento, Jetta 2, Golf MK2, Golf MK3 and Corrado
- ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for all1,4l, 1,6l 16V engines
- ✓ e.g VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
- ✓ total weight: 4,4 kg / saving weight compared to the original: 1,9 kg
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ for Golf MK3 2.0 Syncro, Golf 4 Cabriolet 2.0, VW Vento 1.9 TDI, etc.
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ brake caliper adapter custom-made manufacturing
- ✓ for front und rear axle
- ✓ information about the vehicle
- ✓ for vehicle with PCD : 98mm until up 120mm
- ✓ wheel hub diameter : maximal 77,,9
- ✓ enlargement per wheel : 3mm
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ brake disc / pitch circle diameter (PCD) drilling / modification / custome-made hub bore hole
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer / diameter 28 mm