Gesucht nach BMW | 3er Coupe | M3 3.0 | E36

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4

• ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ adjustable Uniball wishbone bearing for 3. BMW E30 E36 and M3 models, front axle

• ✓ 1x clutch release lever / fork for BMW series 3 E46 E90

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

Hexagonal nut M08
Thread right
Galvanized

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓

  Zimmermann sports brake disc 315x28 Manufacturer's ref. no.: 150.1290.20
  BMW 3 Coupe M3 3.0 E36

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
• ✓ Golf 4 R32

• ✓ Zimmermann brake disc 370x32 Manufacturer's ref.  100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
  
• ✓ Audi TT
• ✓ Seat Leon

• ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
• ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
• ✓ original brake calipers with carrier for handbrake from Golf 4 R32
• ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D

• ✓ Zimmermann sports brake disc 350x32 Manufacturer's ref. 400.3649.52 with hub bore turned up to 68mm, suitable for our brake caliper adapters article 928 and article 929
• ✓ Mercedes M-Klasse R-Klasse GL-Klasse VR6 R32 S3

• ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
• ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ Installation location: front
• ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ assembly position: rear
• ✓ suitable for BMW 3er, 5er, 7er, Z3, M3, V8, V12

• ✓ assembly position: rear
• ✓ suitable for BMW 3er, 5er, 7er, Z3, M3, V8,V12, Alpina

• ✓ assembly position: front
• ✓ suitable for BMW, M3, 520, 525, 7er, 5er, 3er, Z3

• ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material

• ✓ assembly position: rear
• ✓ suitable for BMW M3, 520, 525, 7er, 5er, 3er