Gesucht nach Seat | Cordoba Vario | 1.9 SDi | 6K5

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ clutch master cylinder for VW Golf MK3, Golf MK4 Cabrio Polo Caddy, etc.
• ✓ manufacturer number: 1H1721401, 1H1721401B, 1H1721401A

• ✓ 2x 280x22mm G60 brake discs with 5x100 bolt / pitch circle, suitable for alle vehicles that have been converted to G60 brakes

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ wheel hubs for conversion to 5x100mm bolt circle/PCD for the front axle Golf MK2, MK3 / Cabriolet, Variant, Golf MK4 Cabriolet, Passat, Variant, Vento, Caddy 2 box, Corrado, Seat Cordoba / Ibiza 2 / Toledo 2

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ 2x 280x22mm G60 brake discs with 5x112 bolt/pitch circle, suitable for all vehicles that have been converted to G60 brakes

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ 2x right steering knuckles / axle journals for VW Polo 6N2 Seat Arosa

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ eccentric for article 590 galvanized

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ Zimmermann Brake Disc 280x22 Manufacturer Number 600.1601.20
• ✓ VW Golf GTI G60 Corrado Seat Cordoba Syncro

Hexagonal nut M08
Thread right
Galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ Zimmermann Brake Disc 226x10 Manufacturer's ref. 600.3219.52
• ✓ VW Golf II III IV 1.8 GTI 1.9 TDI Corrado Jetta II Passat Seat Ibiza

• ✓ eccentric for article 244, galvanized

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ 2x drum brake with 5x100 bolt circle suitable for the rear axle of VW Golf 1, 2, Jetta, Audi 80 and many other vehicles
• ✓ OE number: 171501615, 171501615B, 191501615, 191501615B, 171501615A, 823501615B, 171501615C

• ✓ Zimmermann sports brake disc 350x32 Manufacturer's ref. 400.3649.52 with hub bore turned up to 68mm, suitable for our brake caliper adapters article 928 and article 929
• ✓ Mercedes M-Klasse R-Klasse GL-Klasse VR6 R32 S3

• ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
• ✓ Golf 4 R32

• ✓ Zimmermann brake disc 370x32 Manufacturer's ref.  100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
  
• ✓ Audi TT
• ✓ Seat Leon

• ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
• ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire

• ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
• ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
• ✓ original brake calipers with carrier for handbrake from Golf 4 R32
• ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ For front axle VW Golf Mk2 Jetta 2, year of construction up to 07/1987

• ✓ spare part for drive shafts for the Golf MK1, MK2 and MK3, Caddy, Jetta 1, Scirooco
• ✓ gaiter / ruber sleeve

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ Installation location: front
• ✓ Number of holes: 4
• ✓ Bolt circle: 100
• ✓ Diameter: 256mm
• ✓ Thickness: 20mm
• ✓ Height: 38mm

• ✓ assembly position: rear
• ✓ suitable for Audi A6 Avant 3.0 quattro