Gesucht nach Audi | A8 | S8 quattro | 4D2, 4D8
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ Zimmermann sports brake disc 310x22 Manufacturer's ref.: 100.3311.52
- ✓ Audi A8 S8 quattro VW Phaeton 3.0 V6 TDI
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ Zimmermann brake disc 356x22 Manufacturer's ref.: 100.3362.20
- ✓ Audi A6 A7 Sportback A8 S8 3.0 TDI TFSI quattro
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ Zimmermann sports brake disc 310x22 Manufacturer's ref. no.: 100.3311.20
- ✓ Audi A8 S8 quattro VW Phaeton 3.0 V6 TDI 4motion
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ assembly place : rear
- ✓ number of holesl: 5
- ✓ PCD: 112
- ✓ diameter: 335mm
- ✓ thickness: 22mm
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ assembly position: rear
- ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
Hexagonal countersunk socket screw
Type: M10x25
Thread: 1.25
Blank
Class 10.9
Hexagonal screw entirely thread
Type: M08x30
Galvanized
Quality: 8.8
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
Hexagonal screw high resistance entirely thread
Type: M10x20
Thread: 1.25
Blank
Quality: 10.9
- ✓ lubricant developed by EBC itself
- ✓ optimized for use on brake systems
- ✓ exact viscosity for brakes
- ✓ do not use standard lubricants on brake systems
- ✓ for sliding pins, bolts, screws, bars on the brake calipers
- ✓ never apply to the surface
Adapter with reduction from M12x1,0 on M10x1,0(inner thread)for connection between brake hose and braking force regulator.
Hexagonal screw entirely thread
Type: M08x25
Galvanized
Quality: 8.8