Gesucht nach VW | Transporter III Bus | 1.6 TD Syncro | --
- ✓ for all VW T2, T3 bus transporter
- ✓ engine: to 1,9l TDI (116 HP) AFN
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
- ✓ adapter plate engine starter TDI engine conversion
- ✓ VW T3 Bus/Synchro TDI starter Golf MK3 Bulli Britsche Doka
Full adaptation/fixation kit for installation of brake disc system T4 on rear axle of VW T3 Bus.
- ✓ for e.g VW T3 bus / transporter. Length 50cm
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ transparent covered
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for all T3 bus / transporter with diesel engine from Yoc 84
- ✓ hydromount / hydraulic bearing for all T3 bus / transporter with diesel engine from Yoc 84 and as manufacturer reference for Toledo, Golf MK3, etc
- ✓ for rear axle: VW T3 Bus
- ✓ brake caliper: VW Bus T4
- ✓ brake disc: VW Bus T4 280x12mm (15 inch) or 294x13,5mm (16 inch)
Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..
- ✓ anti-theft protection system for pedals on T2 T3 bus, also Syncro Doka Pritsche Bulli
VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter
Wheel hub for front axle brake system conversion for installation of Audi A6
disc diameter 312x25mm in combination with Audi A6 brake calipers…
- ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)
- ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: VW T3 bus
- ✓ brake caliper: Porsche reference : 996.352.421 + 996.352.422
- ✓ brake disc: A4 S4 rear axle 300x22mm reference : 8E0 615 601 R
- ✓ for rear axle: VW T3 Bus
- ✓ Brake caliper: VW Golf 3 4 G60 VR6 Girling 38 parts NR. 1H0698451F
- ✓ Brake disc: VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) 268x10mm VW NR. 7M0615601
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Tailor-made Wheel hub for for installation of brake disc system on rear axle of VW T3 Bus.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for all T3 bus. Diesel engines , YoC from 84
- ✓ for conversion to hydraulic bearing, reference: 3A0.199.402
- ✓ 2x drive shaft adapters in order to install the stable drive shafts from T3 Syncro onto 2WD
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ 1x shaft joint screw for drive shaft on VW T2, T3 and T4 bus/transporter
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ for front axle: T3 bus Syncro (16 inch axle)
- ✓ brake caliper: Porsche Cayenne , reference, 955.351.421 + 955.351.422
- ✓ brake disc: Audi A4 Quattro, A6 312x25 mm reference 4B0 615 301 A
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ 1x hydraulic steering gear as shown including tie rods for your VW T3 transporter, platform, utility and T3 chassis
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x25
Thread 1.5
Blank
Quality 10.9
Hexagonal countersunk socket screw high resistance
Type: M10x25
Blank
Class 10.9
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x20
Thread: 1.5
Blank
Quality: 10.9
Cylinder head screw with hexagon socket
Size: M14x65
Thread gradient: 1.5
Material: steel high-strength quality 12.9
- ✓ steering angle limiter / turning angle reducer
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 60,00 mm
- ✓ external diameter: 67,00 mm
Hexagonal socket head cap screw high resistance entirely thread
Type: M10x30
Thread 1.25
Blank
Quality 12.9