Gesucht nach VW | Transporter III Pritsche/Fahrgestell | 2.1 Syncro | --
- ✓ gearbox adapter plate for VW T3 transporter / van to install a 012 Audi / Passat 5-speed gearbox
- ✓ for all VW T2, T3 bus transporter
- ✓ engine: to 1,9l TDI (116 HP) AFN
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (90PS) 1Z
Full adaptation/fixation kit for installation of brake disc system T4 on rear axle of VW T3 Bus.
- ✓ drive shaft adapter for the VW T3 transporter to continue using the original drive shafts, also with the 012 Audi gearbox
- ✓ for e.g VW T3 bus / transporter. Length 50cm
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ transparent covered
- ✓ mounting bracket / holder / support for conversion to 012 VW / Audi 5-speed gearbox on model VW T3 transporter
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for all T3 bus / transporter with diesel engine from Yoc 84
- ✓ hydromount / hydraulic bearing for all T3 bus / transporter with diesel engine from Yoc 84 and as manufacturer reference for Toledo, Golf MK3, etc
- ✓ for rear axle: VW T3 Bus
- ✓ brake caliper: VW Bus T4
- ✓ brake disc: VW Bus T4 280x12mm (15 inch) or 294x13,5mm (16 inch)
Full front axle adaptation/fixation kit for installation of brake disc system from Audi A6 with
disc diameter 312x25mm in combination with Audi A6 brake calipers…..
- ✓ anti-theft protection system for pedals on T2 T3 bus, also Syncro Doka Pritsche Bulli
VW T3 BUS Rear axle brake adapter Girling 38 Brake disc transformation 268x10mm Brake caliper adapter
Wheel hub for front axle brake system conversion for installation of Audi A6
disc diameter 312x25mm in combination with Audi A6 brake calipers…
- ✓ engine mounting bracket / holder / support set for conversion of all VW T2/ T3 bus transporter van (also Syncro)
- ✓ to ASZ 1.9 TDI PD 131PS engine, installed in Golf MK4 Audi A3 Seat Leon, etc
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: VW T3 bus
- ✓ brake caliper: Porsche reference : 996.352.421 + 996.352.422
- ✓ brake disc: A4 S4 rear axle 300x22mm reference : 8E0 615 601 R
- ✓ for rear axle: VW T3 Bus
- ✓ Brake caliper: VW Golf 3 4 G60 VR6 Girling 38 parts NR. 1H0698451F
- ✓ Brake disc: VW Sharan 2.8 VR6 (7M8, 7M9, 7M6) 268x10mm VW NR. 7M0615601
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Tailor-made Wheel hub for for installation of brake disc system on rear axle of VW T3 Bus.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for all T3 bus. Diesel engines , YoC from 84
- ✓ for conversion to hydraulic bearing, reference: 3A0.199.402
- ✓ for all VW T2, T3 bus
- ✓ engine: to 1,9l TDI (131PS) ASZ
- ✓ 2x drive shaft adapters in order to install the stable drive shafts from T3 Syncro onto 2WD
- ✓ angle plates / exhaust mounting bracket for the VW T3 transporter/utility, engine conversion to 1.9l TDI AFN
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ 1x shaft joint screw for drive shaft on VW T2, T3 and T4 bus/transporter
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ for front axle: T3 bus Syncro (16 inch axle)
- ✓ brake caliper: Porsche Cayenne , reference, 955.351.421 + 955.351.422
- ✓ brake disc: Audi A4 Quattro, A6 312x25 mm reference 4B0 615 301 A
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer suitable for many vehicles
- ✓ centering ring, exclusive and individual custom-made
- ✓ rings made of high-strength steel
- ✓ EBC ultra-high performance brake fluid 500 ml
- ✓ to reduce corrosion within the braking system
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ steering angle limiter / turning angle reducer / diameter 28 mm
- ✓ brake caliper adapter custom-made manufacturing
- ✓ for front und rear axle
- ✓ information about the vehicle
- ✓ for vehicle with PCD : 98mm until up 120mm
- ✓ wheel hub diameter : maximal 77,,9
- ✓ enlargement per wheel : 3mm
- ✓ continuous steering angle limiter / turning angle reducer made of stainless steel, suitable for all vehicles
- ✓ thickness 8mm diameter 22mm