Gesucht nach VW | Caddy II Großraumlimousine | 1.6 | 9K9B
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ for rear axle : VW Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper : reference VW left 8N0615423C, reference VW right 8N0615424C
- ✓ brake caliper support /bracket: reference 8N0615425B
- ✓ brake disc: VW/Audi 4motion 256x22mm
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for rear axle: Golf MK4, Polo, Derby, Vento, Cordoba, Vario, Ibiza, Fabio, Fox, Audi A2
- ✓ brake caliper and pad: R32 / S3 reference : 8N0 615 423 B
- ✓ brake caliper support / bracket from R32 / S3 reference : 8N0615425B
- ✓ brake disc: VW Golf MK4, Audi A3 1,8 1,9TDI 280x22mm reference : 1JO 615 301 E
- ✓ for rear axle: VW Golf MK4, Seat Leon Cupra
- ✓ bracke caliper: R32/S3 , reference: 1J0 615 425 D + 1J0 615 426 D
- ✓ brake disc: VW Phaeton 310x22mm , reference : 3D0 615 601 D
- ✓ for all 1.4l, 1.6l 16V engines with 200mm clutch
- ✓ e.g. VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
- ✓ Total weight: 3.8 kg / Savings compared to the original: 2.5 kg
- ✓ for vehicles with 5-speed gearbox
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ rear axle (front-wheel drive): Golf MK4, Audi A3 8L Seat Toleda Bora
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04
- ✓ brake caliper mounting bracket: Audi S3 8L or VW Golf R32, rear
- ✓ brake disc: 310x22 , rear, VW Phaeton
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ for rear axle: Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper left VW reference 8N0615423C, brake caliper right VW referecne 8N0615424C
- ✓ brake caliper mounting braket: reference 8N0615425B
- ✓ brake disc: VW+ Audi 4motion 256x22mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ for rear axle: Audi A3 8L, VW Golf MK4, Bora, Jetta MK4, Seat Leon, Toledo, Octavia
- ✓ brake caliper: Porsche , reference 996.352.421 + 996.352.422
- ✓ brake caliper mounting bracket: rear axle , Audi S3 8L or VW Golf R32
- ✓ brake disc: Golf MK 4 280x22mm part number: 1J0 615 301 P
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for all1,4l, 1,6l 16V engines
- ✓ e.g VW Polo 6N, VW Caddy 2, VW Caddy 2, Seat Arosa, Seat Cordoba, Seat Ibiza
- ✓ total weight: 4,4 kg / saving weight compared to the original: 1,9 kg
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ assembly position: front
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ spare part for drive shafts for the Golf MK1, MK2 and MK3, Caddy, Jetta 1, Scirooco
- ✓ gaiter / ruber sleeve
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ Installation location: front
- ✓ Number of holes: 4
- ✓ Bolt circle: 100
- ✓ Diameter: 256mm
- ✓ Thickness: 20mm
- ✓ Height: 38mm
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ For front axle VW Golf Mk2 Jetta 2, year of construction up to 07/1987
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ PCD adapter / Pitch Circle adapter, spacer / track plate / exclusive and individual, custom-made manufacturing
- ✓ plates made of high-strength aircraft aluminum
- ✓ with engraved logo on the plate and material certificate for easier registration
- ✓ EBC ultra-high performance brake fluid 500 ml
- ✓ to reduce corrosion within the braking system
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
