Gesucht nach Audi | A1 | 1.8 TFSI | 8X1, 8XK
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for rear axle : VW Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper : reference VW left 8N0615423C, reference VW right 8N0615424C
- ✓ brake caliper support /bracket: reference 8N0615425B
- ✓ brake disc: VW/Audi 4motion 256x22mm
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for rear axle: Golf MK4, Polo, Derby, Vento, Cordoba, Vario, Ibiza, Fabio, Fox, Audi A2
- ✓ brake caliper and pad: R32 / S3 reference : 8N0 615 423 B
- ✓ brake caliper support / bracket from R32 / S3 reference : 8N0615425B
- ✓ brake disc: VW Golf MK4, Audi A3 1,8 1,9TDI 280x22mm reference : 1JO 615 301 E
- ✓ for rear axle: VW Golf MK4, Seat Leon Cupra
- ✓ bracke caliper: R32/S3 , reference: 1J0 615 425 D + 1J0 615 426 D
- ✓ brake disc: VW Phaeton 310x22mm , reference : 3D0 615 601 D
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ rear axle (front-wheel drive): Golf MK4, Audi A3 8L Seat Toleda Bora
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04
- ✓ brake caliper mounting bracket: Audi S3 8L or VW Golf R32, rear
- ✓ brake disc: 310x22 , rear, VW Phaeton
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper left VW reference 8N0615423C, brake caliper right VW referecne 8N0615424C
- ✓ brake caliper mounting braket: reference 8N0615425B
- ✓ brake disc: VW+ Audi 4motion 256x22mm
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ these spacers are used to install discs that are too large in size or diameter and thus touch the wheel axle.
- ✓ for rear axle: Audi A3 8L, VW Golf MK4, Bora, Jetta MK4, Seat Leon, Toledo, Octavia
- ✓ brake caliper: Porsche , reference 996.352.421 + 996.352.422
- ✓ brake caliper mounting bracket: rear axle , Audi S3 8L or VW Golf R32
- ✓ brake disc: Golf MK 4 280x22mm part number: 1J0 615 301 P
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ complete brake system for rear axle: Golf 4 Bora Vento Audi A3 Series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high-strength aluminum spacer plates in 9mm thickness with bolt circle / pitch circle 5x100 and 5x112 for Golf Mk4 Polo 6R and much more
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Bracket 6 piston Porsche Panamera brake caliper
- ✓ sticker EPYTEC size (155mmx50mm)
- ✓ steering angle limiter / turning angle reducer
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 25mm
- ✓ internal diameter: 12,2mm
- ✓ lenght: 1mm
- ✓ material: steel-electrolytically galvanized
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles