Gesucht nach BMW | 5er | 525e | E28
- ✓ bush for wishbone / control arm on 5er BMW series E39 axle stub, wheel bearing housing front left right
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ aluminium oil pan / sump baffle plate for all BMW models with M20 engine, e.g on models E21, E30, 320i, 323i, 325i, 520i
- ✓ BMW E30 M3 S14 camber correction / adjustement plate, front axle, +/-0,5
- ✓ for all 2.5 and 2.7 M20 engines WITHOUT Motronic / L-Jetronic installed in:
-
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series convertible 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ Total weight: 5,0 kg / Savings compared to original: 7,0 kg
- ✓ camber eccentric screw for BMW E30 to adjust camber on rear axle
- ✓ for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic installed in the
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series convertible 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ Total weight: 4,9 kg / Savings compared to original: 7,1 kg
- ✓ for vehicle with PCD: 5x120 uand hub centric: 72,5
- ✓ to brake disc with PCD: 5x120
- ✓ brake disc diameter: 79,0
- ✓ enlargement by wheel: 12mm
- ✓ for front axle: BMW E24 / 28 / 31 / 32 / 34
- ✓ BMW F21 / 30 / 32 4-piston brake caliper
- ✓ reference: 34116799465 / 34116799466 (with M logo )
- ✓ reference: 34116850931 / 34116850932 (gray)
- ✓ Brembo reference: 20.A788.01 / 02
- ✓ brake disc: BMW F21/30/32 340x30mm reference: 34106797602
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ sealing / jointing gasket, suitable for all BMW M20 engines
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for 2.5 and 2.7 M20 engines without Motornic / L-Jetronic
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series Cabrio 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ flywheel kit consisting of lightened flywheel, spring-loaded sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic from BMW E28 E30, E34
- ✓ flywheel kit consisting of a lightened flywheel, a spring-loaded, organic clutch disc and a reinforced pressure plate
- ✓ suitable for 2.5 and 2.7 M20 engines with Motornic / L-Jetronic
- ✓ Rigid clutch disc with sinter pad clutch lining
- ✓ Transmittable torque [Nm]: not specified by the manufacturer
- ✓ Diameter [mm]: 228
- ✓ Number of teeth: 10
- ✓ Hub profile: 23x29-10N
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ brake disc / pitch circle diameter (PCD) drilling / modification / custome-made hub bore hole
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ steering angle timiter / turning angle reducer
- ✓ 2-part steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ external diameter: 16mm
- ✓ internal diameter: 14mm
- ✓ length: 20mm
- ✓ material: stainless steel
Cylinder head screw with hexagon socket
Size: M14x65
Thread gradient: 1.5
Material: steel high-strength quality 12.9