Gesucht nach VW | Sharan | 2.8 VR6 Syncro | 7M6, 7M8, 7M9
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
- ✓ 1.for front axle: Golf 4 Jubi, Golf 4 V6, Audi S3, Audi TT 225 PS
- ✓ 1.brake disc: 312x25
- ✓ 2.for front axle: Golf 4R32, Audi S3, Audi TT
- ✓ 2.brake disc: 334x32
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for all VW VR6 engines with 2,8 and 2,9 AAA and ABV
- ✓ e.g. VW Passat VR6 2,9l ABV
- ✓ total weight: 4,1 kg / saving weight compared to the original: 6.8 kg
- ✓ for front axle: Golf MK3, Passat 35i VR6,Corrado VR6
- ✓ brake caliper: Porsche Cayenne (rear axle) reference 955.352.421 + 955.352.422 Brembo reference : left 20.7673.03 + right 20.7673.04
- ✓ brake disc: Seat Leon Cupra R 323x28 reference : 1ML 615 301
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP
- ✓ for front axle: Golf MK4 25 years Jubi GTI / V5, Golf MK4 V6, Audi S3 8L,TT
- ✓ brake caliper: S3 /R32 reference : left 1J0615125B , right 1J0615126
- ✓ brake disc: S3 R32 312x25mm reference : left 1J0615301AA , right 1J0615302A
- ✓ brake pad: S3 /R32 reference : 8D0698151D
- ✓ 1x 3mm reinforcing steel plate for underide protection, for VR6 oil sump/ pan, suitable for all vehicles with VR6 engine, for example Golf MK1 MK2 MK3 Corrado Vento, etc.
- ✓ connection reducer to radiator water inlet. Is required on Golf MK1 for conversin to VR6 / R32 engine
- ✓ reinforcing plate for all VW VR6 R32 und VR6 turbo / chager engines
- ✓ for fraont axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake caliper: ZR18 Porsche Porsche Cayenne or VW Tuareg , reference 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Golf MK4 R32 334x32 mm , reference 1J0 615 301A +1J0 615 302 A
- ✓ Aluminium bushing for Golf VR6 02a G60 cable gearstick
- ✓ 1x assembly adapter for the VR6 engine
- ✓ complete brake system for front axle: VW Golf 3, VW Passat, VW Corrado, Seat Toledo
- ✓ brake calliper: Porsche Cayenne ZL17 / ZR17 part no. 7L6 615 123 T + 7L6 615 124 T
- ✓ Brake disc: Golf 4 R32 334x32mm Part No. 1J0 615 301AA + 1J0 615 302 A
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle, stable up to 800 HP.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread straight
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ for front axle: Golf VR6, Corrado VR6, Passat 35i VR6
- ✓ brake caliper: Porsche 996 (HA) reference :996.352.422 + 996.352.421
- ✓ brake disc: Audi S3 (8L) /Golf 4 GTI 312x25mm reference : 8N0 615 301 A
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
Reinforzed motor cradle for engine exchange.For installation of engine typ VW VR6 on Passat Golf Corrado Vento
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ complete brake system for front axle: Golf VR6,Corrado VR6,Passat 35i
- ✓ brake calliper: Porsche Cayenne ZR18 / ZL18 part no. 955.351.421.50 + 955.351.422.50
- ✓ Brake disc: Golf 4 R32 334x32 mm Part No. 1J0 615 301A +1J0 615 302 A
Brake caliper adapter for front axle brake system to fix brake discs typ Cupra R diameter 323x28mm in combination with Porsche 996 Brembo brake calipers on VW vehicles.
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ Drive shaft set for all VW Golf 2 3, Passat, Corrado with VR6 plus axle, stable up to 1000 hp
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ for front axle: Golf VR6, Corrado VR6,Passat 35i VR6
- ✓ brake caliper: TTRS , reference : left 8J0 615 107 + right 8J0 615 108
- ✓ brake pad: reference 8J0 698 151 E
- ✓ brake disc: Golf MK4 R32 334x32mm , reference : 1J0 615 301AA + 1J0 615 302 A
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ drive shaft for Golf Mk2 Golf plus axle VR6, stable up to 800 hp
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ drive shaft kit for all VW Golf MK2 MK3, Passat, Corrado with VR6 axle. Stable up to 800 hp.