Gesucht nach Audi | A1 | S1 quattro | 8X1, 8XK
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Touareg reference. 955.351.421.50 + 955.351.422.50
- ✓ brake disc: Mercedes 5x112 PCD 350x32mm reference : 164 421 05 12 + A 164 421 05 12
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for rear axle: VW Golf Mk7, Audi S1, Audi A3, S3, RS3, Seat Leon ST, Skoda Octavia 3, etc
- ✓ brake disc: internally ventilated 356x22 Audi A6, reference 4H0 615 601 F / or the perforated Wave brake disc from the Audi RS7 356x22 mm, reférence 4G8.615.601
- ✓ brake caliper: original Golf Mk7 Audi S3 RS3, reference 8V0615425B
- ✓ brake pad: original, reference 8V0 698 151G
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for front axle: VW Golf MK5 MK6 Audi A3 Seat Leon, etc
- ✓ brake caliper: Renault Megane 3 RS, reference 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R
- ✓ brake disc: Golf MK5 MK6, 5x112 bolt circle/PCD) 345x30 mm, manufacturer reference VW Audi: 1K0 615 301 AB , 1K0 615 301 M
- ✓ for rear axle: Golf Mk7, Audi A3 series
- ✓ brake caliper: Porsche Cayenne, rear xale, reference 955.352.421 + 955.352.422 / Brembo reference 20.7673.03 + 20.7673.04
- ✓ original brake calipers with carrier for handbrake from Golf 7R part number:
- ✓ Part number brake caliper: 5Q0615424 / 5Q0615424
- ✓ Part number brake caliper carrier: 5Q0615425 / 8V0615425B
- ✓ brake disc: Audi A6 A7 356x22 mm, reference 4H0 615 601 F
- ✓ for the steel front axle on: VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon and more.
- ✓ brake caliper: Porsche Cayenne or VW Tuareg (17 inch version) , reference 7L6 615 123 T and 7L6 615 124 T
- ✓ brake disc: Mercedes 5x112 PCD 330x32mm, reference 164 421 05 12 + A 164 421 05 12
- ✓ for front axle: Golf MK5 MK6 Audi B5 S4
- ✓ brake caliper: Audi R8 8-piston original Brembo brake caliper, reference left: 8E0615107 , right 8E0615108
- ✓ brake disc: Audi RS3 370x34 , reference 8V0.615.301.P
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ for front axle: Golf MK5, MK6 Audi A3 8P
- ✓ bracke caliper: Audi TTRS , reference : left 8J0 615 107 + right 8J0 615 108
- ✓ brake disc: Mercedes 350x32 , reference : 164 421 0512 + 164 421 1412
- ✓ brake pad: reference 8J0 698 151 E
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ complete brake system for front axle: Audi A3 (8L), Audi TT (8N), VW Golf 5, Golf 6, Skoda Octavia, Seat Leon etc.
- ✓ brake calliper: Porsche Cayenne ZR18 / ZL18 part no. 955.351.421.50 / 955.351.422.50
- ✓ Brake disc: Mercedes 5x112 bolt circle 350x32mm part no. 164 421 05 12 + A 164 421 05 12
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ these spacers are used to install discs that are too large in size or diameter and thus touch the wheel axle.
- ✓
VW Golf MK5 / MK6
- ✓
Golf Plus
- ✓
Jetta 4
- ✓
Audi A3 (8P)
- ✓
Seat Leon (1P1)
- ✓
Seat Altea
- ✓
Seat Altea XL
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ complete brake system for rear axle: Golf 7, Audi A3 series, Scoda Octavia
- ✓ Porsche Cayenne brake calliper part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 7R part number:
- ✓ Part number brake caliper: 5Q0615424 / 5Q0615424
- ✓ Part number brake caliper carrier: 5Q0615425 / 8V0615425B
- ✓ original Audi A6 A7 brake disc 356x22 mm part number: 4H0 615 601 F
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ high-strength aluminum spacer plates in 9mm thickness with bolt circle / pitch circle 5x100 and 5x112 for Golf Mk4 Polo 6R and much more
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
- ✓ Bracket Z17 ZR17 ZR18 Z18 6 piston Porsche brake caliper
Bushing
Ø ouside 19mm
Ø inside 11mm
Length 12mm
Stainless steel V2A
- ✓ spare bolts for cardan shaft flange
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ blanking / lock / sealing plug made of aluminum black anodized for all brake calipers with M10x1 thread
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles