Gesucht nach Audi | 80 Avant | S2 quattro | 8C5, B4
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ 1x clutch disc 240mm suitable for VW Golf MK4 1.8T GTI Bora V5 V6 Passat Audi A3 A4 A6 TT Seat Leon Ibizia
- ✓ transmittable torque [Nm]: 600
- ✓ diameter [mm]: 240
- ✓ number of teeth: 23
- ✓ hub profile: 21,8x24 2-23N
- ✓ torsion spring clutch disc with sinterpad clutch coating/lining
- ✓ for front axle: Audi 80 S2 B4
- ✓ brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253
- ✓ brake pads: reference 4L0 698 151 A
- ✓ brake disc: VW Phaeton 360x34 mm , reference 3D0 615 301 M
- ✓ engine mounting bracket to install the 1.8T engine (AEB) from the Audi A4 B5, Audi A6, VW Passat 3B in the Audi 80 B4
- ✓ for front axle: for Audi 80, 90, S2, etc.
- ✓ Porsche 993 Big Red brake calipers part no: 993.351.425 / 993.351.426
- ✓ Brake pads part number: 92835194002
- ✓ Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A
- ✓ Wheel hub from Audi S2 with 5x112 must be installed ( also available in our store. Part number: 46859 click here)
- ✓ wheel hubs for conversion to 5x112 bolt circle/ pitch diameter circle (pdc) - front axle
- ✓ suitable for Audi 80 / 90. Series with an 82 wheel bearing diameter
- ✓ for all Audi 5 cylinder 2.2 20V Quattro with MKB ADU ABY AAN KV engine
- ✓ e.g Audi S2 S4
- ✓ total weight: 7,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforcing plate for engine / cylinder block on all models Audi 5 cylinder 20V turbocharger 7A, RR, AAN, ADU, ABY 3B and 2,5L conversion with diesel block
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ for front axle: Audi 80, 90, S2, etc.
- ✓ brake caliper: VW Touareg 7L V6 BM5 Brembo 4-piston, reference 7L6 615 123 R / 7L6 615 149 A Brembo: 209236062A / 209236051A
- ✓ brake disc: Audi S8 345x30mm, reference 4D0 615 301 B
- ✓ the wheel hub of the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859)
- ✓ for front axle: Audi S2, Audi 80 / 90
- ✓ brake caliper: Audi RS3 / TTRS, reference left 8J0 615 107 / right 8J0 615 108
- ✓ brake disc: Audi S8 in 345x30, reference: 4D0615301B
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Audi S2 Avant and Limo and Audi 80 B4 Quatrro with 5-hole wheel hub
- ✓ brake disc: A6 all-wheel drive brake discs 302x12mm, reference: 24.0112-0176.1
- ✓ brake caliper: original Audi S2 Coupe, rear axle
- ✓ for front axle: AUDI S2
- ✓ brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108
- ✓ brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
Brake caliper adapter for front axle brake system to fix brake discs typ Audi A8 diameter 360mm
in combination with big brake calipers from Porsche 996 Turbo GT3 on Audi/VW vehicles.
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ flywheel kit consisting of lightened flywheel, spring sinterpad clutch disc and pressure plate with reinforced design
- ✓ for all Audi 5-cylinder, whether 5- or 6-speed, engine code: MKB ADU ABY AAN KV
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ for Audi 80 S2 Quattro, Coupe 2.3 20V, etc.
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ for front axle of Audi S2, Audi 80
- ✓ brake caliper: Porsche 996/GT3
- ✓ brake disc: Audi S8 345x30mm
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ for front axle: Audi S2
- ✓ brake caliper: Audi RS2 reference 8A0 615 106 k
- ✓ brake disc: Audi S8 345x30mm reference 4D0 615 301 B
- ✓ for front axle: Audi 80, 90, S2, etc.
- ✓ brake caliper: Audi 4-piston Audi S8 D2, reference 4D0615107D | 4D0615108D
- ✓ brake disc: Audi S8 345x30mm, reference 4D0615301B
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
Hexagonal coupling nut M8x30
Thread right
Galvanized