Gesucht nach BMW | 3er Cabriolet | 325i | E30
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ Wheel hubs for the conversion to 5x120mm bolt circle / pitch circle for the front axle of the BMW E30
- ✓ wheel hub set for the conversion to 5x120mm bolt circle / pitch circle for the front axle of the BMW E30
- ✓ camber eccentric screw for BMW E30 to adjust camber on rear axle
- ✓ for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic installed in the
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series convertible 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ Total weight: 4,9 kg / Savings compared to original: 7,1 kg
- ✓ BMW E30 Cabrio repair kit
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ reinforcing plate for suspension turrets / strut mounts on all models BMW E30, except 4WD
- ✓ 2x 260x22mm BMW E30 brake discs with 5x120 bolt circle / pitch circle for the front axle
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 2x 258x10mm BMW E30 brake discs with 5x120 bolt circle / pitch circle for the rear axle
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ adjustable Uniball wishbone bearing for 3. BMW E30 E36 and M3 models, front axle
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ for front axle: BMW E30 316i, 320i, etc.
- ✓ BMW E36 brake calipers, part number: Right: 34111160346 / Left: 34111160345
- ✓ Brake caliper carrier BMW E36, part number: 34111160347
- ✓ Brake discs from Fiat Coupe 284x22mm part no. 46403958
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for 2.5 and 2.7 M20 engines without Motornic / L-Jetronic
- ✓ BMW 5 series 525e ( E28 )
- ✓ BMW 3 series 325i 325iX 325e ( E 30 )
- ✓ BMW 3 series Touring 325i 325iX ( E30 )
- ✓ BMW 3 series Cabrio 325i ( E30 )
- ✓ BMW 5 series 525i ( E34 )
- ✓ BMW Z1 Roadster 2.5
- ✓ flywheel kit consisting of lightened flywheel, spring-loaded sinterpad clutch disc and pressure plate in reinforced design
- ✓ suitable for all 2.5 and 2.7 M20 engines with Motronic / L-Jetronic from BMW E28 E30, E34
- ✓ flywheel kit consisting of a lightened flywheel, a spring-loaded, organic clutch disc and a reinforced pressure plate
- ✓ suitable for 2.5 and 2.7 M20 engines with Motornic / L-Jetronic
- ✓ Rigid clutch disc with sinter pad clutch lining
- ✓ Transmittable torque [Nm]: not specified by the manufacturer
- ✓ Diameter [mm]: 228
- ✓ Number of teeth: 10
- ✓ Hub profile: 23x29-10N
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32