BMW E30 Front Axle Reinforcement Reinforcing Kit 6 Plates Front Axle 328i 325i 320i

€40.10*

Prices incl. VAT plus shipping costs

23 Reviews

Available

Delivery by Tuesday, 07.05.2024 if you order within the next 10 Hours.

Product number: 150

From an order value of €30 your delivery is free inside Germany.

Weight: 0.39 kg

Passendes Zubehör

Wheel Spacer Hub Centric Track Plate Brake Disc BMW E30 to E36 M6

2x spacers / plates made of high-strenght aluminium which are mounted under the brake discs. These plates are used to mount brake discs which have a too large overall height and diameter, and would thus strip on the wheel carrier / bearing. With our plates, the brake disc is pushed outwards. The spacers / track plates are perfect for BMW E30 when converting to 5 holes, and perfect for BMW series with 5x100 PCD brake discs, and which have a large overall height and could not otherwise be used. You can find corresponding brake caliper adapters for conversion to 315x28 brake discs, combined with E36 M3 brake calipers, in our shop Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance. Technical data: thickness: 12 mm PCD: 5x120 hub centric: 72,5 disc diameter: 79,0 Delivery: 2x spacers / plates made of high-stregnht aluminim, 12 mm, for BMW E30 to E36 M3 brakes TÜV - certificate for registration

€98.63*

Repair Kit BMW E30 Cabrio Top Cape Houd Engine Crankcase

Complete repair kit for the BMW E30 Cabrio. Mounting plate for the attachment points of the motor housing. Including brass sleeve / bush, which are no longer manufactured by BMW.. This repair kit is made of stainless steel and guarantees a very long service life. All parts are manufactured by digital milling (CNC) which guarantees a perfect fit. Our kit can be used without disassembling the motor housing. It's a time saving. The plate is simply mounted on the original fixing points of the BMW E30 Cabriolet. As it becomes thicker on the fixing points with the plate, we also deliver two spacing rings as spacers, only one of which is required, depending on the diameter. Delivery: 1x plate made of stainless steel for BMW E30 Cabrio 2x spacing rings with different sizes 1x brass sleeve / bush complete set of mounting screws

€61.51*

BMW E30 Conversion Steering Gear Box Direct Steering E36 E46 Z3 Adapter Spacer Bush Washer

Bush / spacer / washer / adapter bushings to install the steering gear box from BMW E36, E46 and Z3 onto BMW E30. By converting the steering gear to BMW E36, the driving and the driving feeling are significantly better, because the steering is extremly more direct than on the original E30 model. Thanks to our adapter bushes, it is possible to correctly install your steering box. The bushings are made of stainless steel and don't wear out. Technical data: bush for top: 2x 6,4 mm thick bush for bottom 2x 7,4 mm thick Delivery: 4x bushs / spacers / washers / adapter bushings to convert the steering gear on BMW E30 model

€21.99*

BMW E30 E36 320i 325i Engine Mounting Bracket Engine Conversion M30 M5 S38 Engine 3.0 L 3.5 L E34

Simplified engine conversion with our engine mounting brackets. Allows the installation of a M30 / M5 (S38) engine of the E32 and E34 (3.0 and 3.5l of the 5er and 7er) onto E30, E36, or Z3 BMW models Our engine mount kit has a perfect fit for engine position II and III in the BMW E30 Advantages: extreme time saving easy and quick assembly excellent corrosion protection thanks to full galvanizing top optics allows a professional motor conversion material certificate Delivery: 2x engine mounting brackets for BMW E30, E36, Z3 (right and left) to convert to M30 M5 engines material certificate

€181.28*

BMW E30 Engine cradle Conversion V8 M60 M62 S62 Engine conversion

Simple and quick engine conversion with our BMW engine mounts.Our engine cradle allows the installation of M60 M62 S62 engine in BMW E30 E36 Z3. These engines are serially installed in all BMW E32, E34, E38 and E39. On vehicles with air conditioning the original right handed motor cradle fixes the air compressor. On the ones without, the original motor cradle is not necessary. Conversions on V8 engine with air conditioning do require some modifications. Ideal for this conversion is a front axle lowering of at least 10mm (20mm is even better) to get enough space between the axle and the hood so that the drive rod can be aligned straight. Corresponding axle lowering blocks can also be found in our shop. Original E32, E34, E38, E39 engine rubbers with a height of approx. 70-75mm are used Advantages: Extreme time saving Easy and fast assembly Best corrosion protection through full galvanizing Super optics allows a professional engine conversion Scope of delivery: 2x BMW E30 E36 Z3 Engine cradle. Left and right side.

€116.99*

BMW E30 Welding Plate Reinforcing Plate Repair Set Sheet Rocker Panel

One of the vulnerable points of the BMW E30 is under the chassis at the bottom of the body, wheelhouse, transmission shaft, cardan tunnel.We have designed our reinforcing plate in a very stable way with folds on the sides. They therefore serve as reinforcement as well as replacement plates.High-quality steel plate perfectly made for welding (material certificate is delivered in PDF file). Delivery: 8x repair / reinforcing plates / welding plates (left and right) for BMW E30, rocker panel, wheel arch, chassis, transmission shaft, cardan tunnel. material certificate

€140.90*

Drift Spacer Steering Lock Spacer BMW E30 E36 E46 Z1 Z3 Stainless Steel

Drift spacer / steering lock spacer in order to increase steering angle on models BMW E30 E36 E46 Z1 Z3Thanks to this spacer, the part of the unused steering rack is reached and you obtain a wider steering angle. The spacers, used in motor sports and drifting, also provide a major advantage for driving on the road. The spacers are simply mounted between the steering box and the steering bar. Delivery: 2x drift spacers / steering lock spacers in to increase steering angle on models BMW E30 E36 E46 Z1 Z3. stainless steel

€13.78*

BMW E30 E24 E28 E34 M3 S14 Camber Correction Adjustement Plate Mount Front Axle +/-0,5 Grad

Camber correction / adjustement plates for the front axle of models BMW E30, E34, E28, E24 (all except 4x4) Thanks to our plates, you can modify the camber of the front axle. This is ideal for front lowering and to correct defects, if a tire is worn out only on one side of your vehicle. With thess plates, you can modify the camber from -0,5 to +0,5 degrees. This means that the tires in the wheel arch are inclined by +/- 0.5 ° inwards or outwards. It is also recommended on racing and slalom circuits. Or simply to take turns at high speed. Our plates are mounted on the axle. Quick and easy assembly. They are made of steel and completely galvanized. Maximum anticorrosive protection and good optics Delivery: 2x camber correction / adjustement plates with mounting schrews for BMW E30, E34, E28, E24 material certificate

€87.62*

BMW E30 M3 +E36 Z3 Gruppe A Camber Adjustment Screw Rear Camber Track

Conversion kit to convert BMW E30 M3 + E36 Z3 group A, rear axle. Adjustement of track and camber. With our conversion kit, you can modify the camber and the track, rear axle, from -3 to +3 degrees. This is ideal for rear lowering and to correct defects, if a tire is worn out only on one side of your vehicle. It is also recommended on racing and slalom circuits. Or simply to take turns at high speed. Functional description: For this conversion kit, it is necessary to make welds on the axle. The plates provided are drilled with an oblong hole. They must be welded to the axle at the point of the suspension arm. Thanks to the oblong holes and eccentric screws, the suspension arm can be adjusted as desired, whilst remaining in the original mounting position. Delivery: 8x plates 4x eccentric screws with washers and nuts

€141.24*

BMW E30 Wheel Hub Conversion PCD 5x120 E36 E46 Adapter Spacer Front 5 Hole Hub

Conversion kit für all BMW E30 models to install the wheel hub of BMW E46 and E36 with 5x120 PCD.The adapter bushs / bushings and the nuts are made of high-strength steel and black galvanized. Assembly: The adapter buchs are simply placed on the original E30 axle stub. Then the E36/E46 hub with the original E36/E46 bearings and the dust cover can then be placed over it and then screwed with the nuts (with lock function). You can reset the original state at any time.Brake caliper adapters for larger brake systems are available in our shop,e.g under article number 149. The axle track is then 7mm wider on each side.If you want to keep the original brake system or a large brake system where the brake discs have a different bolt pattern such as 5x120, we can simply re-drill the brake discs for you -> you can find the article -> by clicking here Required components: hub E36/E46, including wheel bearing and dust cover Socket wrench insert with wrench size 46 for mounting the wheel hub Delivery: 2x adapter bushs for conversin BMW E30 to E36/E46 hub 2x nuts (with lock function) material certificate

€105.75*

BMW 3th E30 E36 Compact Reinforcing Welding Plate Repair Plate Differential Mounting Rear Axle Repair Plate

A complete kit of repair / reinforcing plates for the differential mounting (rear axle)Suitable for all BMW E30 and E36 Compact models. The plates are welded onto the differential mounting either for pure reinforcement or to eliminate cracks. The plates are 100% CNC-made. Delivery: 3x reinforcing plates for the differential mounting (rear axle) on all BMW E30 and E36 Compact models material certificate

€36.99*

BMW 3th E30 E36 Compact Welding Plates Reinforcing Wishbones Rear Axel Repair Plates

Reinforcing plates the rear wishbones, suitable for all models BMW E30 and E36 Compact.These plates are welded between the wishbone arms and behind the hub mount to reinforce them. The driving behavior is significantly improved with these plates! Perfect for drift and rally vehicles. but also for everyone who loves a sporty driving style. Delivery: 6 x reinforcing plates for the rear wishbones (left+right) on all models BMW E30 and E36 Compact material certificate

€69.06*

2x Bremssattelhalter Bremssattelträger hinten BMW 3er 320i 316i E30 Bremsträger OE 34211160396

Zwei neue Bremssattelhalter für die Hinterachsbremssättel vom BMW E30 wie z.B BMW E30, E30 Cabriolet und E30 Toruing.Die Bremssattelhalter werden von BMW direkt nicht mehr hergestellt und sind gebraucht in gutem Zustand nur noch schwer zu bekommen. Hier findest du nun die optimale Lösung als Austausch- oder Neuteil für dein BMW E30 Passende OE Vergleichsnummern: 34211160396 Passend für folgende BMW E30 mit 258x10mm Bremsscheibe: BMW 3er E30 wie z.B. 315, 316 uvm. BMW 3er Cabriolet E30 wie z.B. 320i, 325i BMW 3er Touring E30 wie z.B. 316i, 320i uvm. technische Daten Einbauseite: Hinterachse für Bremsscheibendicke: 10,0 mm für BS-Durchmesser: 258,0 mm Bremsscheibenart: voll Mengeneinheit: Satz Produktart: Bremsträger Produktgruppe: Bremsanlage Einbauposition: Hinterachse Lieferumfang: 1x Satz Bremssattelhalter für Hinterachse des BMW E30, E30 Cabriolet, und E30 Touring

€150.42*

Bremsen Lochkreis Umbau Vorderachse Hinterachse BMW E30 5x120 260 258mm Bremsscheiben Radlager

Wer die Bremsanlage beim BMW E30, E30 Cabriolet und E30 Touring original verbaut lassen möchte und endlich 5x120 Felgen fahren will, ist hier genau richtig.Kompletter Umbausatz für Vorder- und Hinterachse des BMW E30, E30 Cabriolet und E30 Touring. Es wird vorne und hinten auf die 260x22mm und 258x10mm Bremsscheiben nur mit 5x120 Lochkreis umgebaut. Damit kannst du endlich Felgen mit dem Lochkreis 5x120 zu fahren.Das ist wohl die beste Alternative zu unseren Lochkreisadaptern, da damit die Spur nicht verbreitert wird. Vorteile: keine Lochkreisadapter notwendig Plug & Play zu verwenden, kein Umbohren der Bremsscheiben notwendig ect. Radkästen müssen nicht zwingend gezogen werden (natürlich je nach verbauter Felgenbreite) Wie die Originalbremsscheiben nur mit 5x120 Lochkreis: OE Teilenummer der vorderen Bremsscheibe mit original 4x100 Lochkreis: 3411 1154 749, 3411 1154 750 OE Teilenummer der hinteren Bremsscheibe mit original 4x100 Lochkreis: 1119581, 1122282, 34 211119581, 6755407 passend für folgende Fahrzeuge: BMW 3er E30 wie z.B. 315, 316 uvm. BMW 3er Cabriolet E30 wie z.B. 320i, 325i BMW 3er Touring E30 wie z.B. 316i, 320i uvm. Lieferumfang: komplettes Umbaukit für die Vorder- und Hinterachse auf 5x120 Radnaben und Bremsscheiben für den BMW E30, E30 Cabriolet und E30 Touring.

€679.88*

BMW E30 Reinforcing Reinforcement Plate Suspension Turret Strut Mounts

Reinforcing plate for suspension turrets / strut mounts on all models BMW E30, except 4WD Thanks to our plates, the body gains in rigidity. This has the advantage that the body is more stable in turns. The driving sensation is better and more accurate. Both for racetrack, circuit and on the road. A major advantage for safety and driving sensation. Delivery: 2 x reinforcing plates for suspension turrets / strut mounts (left + right) material certificate

€42.99*

BMW E30 Camber Eccentric Screw Bolt Rear Axle Camber Adjustment

Camber eccentric screw for BMW E30 Thanks to these eccentric screws, you can perfectly adjust the camber on the rear axle up to 4mm offset. Delivery: 2x high-strength camber eccentric screws for BMW E30 M12x95 2x locknuts M12

€26.47*

Germany	€0.00
United Kingdom	€20.60
Austria	€18.21
France	€18.21
Switzerland	€19.77
Italy	€15.84
Spain	€15.84
Andorra	€15.84
Arab Emirates	€35.93
Afghanistan	€35.93
Antigua and Barbuda	€40.60
Anguilla	€40.60
Albania	€19.98
Armenia	€35.93
Niederländische Antillen	€40.60
Angola	€40.60
Antarctica	€15.84
Argentina	€40.60
American Samoa	€40.60
Australia	€40.60
Aruba	€40.60
Åland Islands	€15.84
Azerbaijan	€35.93
Bosnia and Herzegovina	€19.98
Barbados	€40.60
Bangladesh	€35.93
Belgium	€18.21
Burkina Faso	€40.60
Bulgaria	€16.36
Bahrain	€35.93
Burundi	€40.60
Benin	€40.60
Saint Barthélemy	€15.84
Bermuda	€40.60
Brunei Darussalam	€35.93
Bolivia (Plurinational State of)	€40.60
Bonaire, Sint Eustatius and Saba	€40.60
Brazil	€40.60
Bahamas	€40.60
Bhutan	€35.93

BMW E30 Front Axle Reinforcement Reinforcing Kit 6 Plates Front Axle 328i 325i 320i

Delivery:

Login