Gesucht nach VW | Caddy II Großraumlimousine | 1.9 TDI | 9K9B
- ✓ for all G60 GTI 16V / TDI engines
- ✓ e.g 1,8T Golf 4, Audi A3 with 5 speed gearbox
- ✓ total weight: 4,1 kg / saving weight compared to the original: 4,9 kg
- ✓ reinforced clutch release lever for all 02A and 02J 5 speed gear
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ for rear axle : VW Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper : reference VW left 8N0615423C, reference VW right 8N0615424C
- ✓ brake caliper support /bracket: reference 8N0615425B
- ✓ brake disc: VW/Audi 4motion 256x22mm
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for rear axle: Golf MK4, Polo, Derby, Vento, Cordoba, Vario, Ibiza, Fabio, Fox, Audi A2
- ✓ brake caliper and pad: R32 / S3 reference : 8N0 615 423 B
- ✓ brake caliper support / bracket from R32 / S3 reference : 8N0615425B
- ✓ brake disc: VW Golf MK4, Audi A3 1,8 1,9TDI 280x22mm reference : 1JO 615 301 E
- ✓ for rear axle: VW Golf MK4, Seat Leon Cupra
- ✓ bracke caliper: R32/S3 , reference: 1J0 615 425 D + 1J0 615 426 D
- ✓ brake disc: VW Phaeton 310x22mm , reference : 3D0 615 601 D
- ✓ clutch master cylinder for VW Golf MK3, Golf MK4 Cabrio Polo Caddy, etc.
- ✓ manufacturer number: 1H1721401, 1H1721401B, 1H1721401A
The steel sheets need to be welded directly on the clutch release lever to avoid folding after installation of more resistant clutch or pressure plate.
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ injection rail for conversion from 16V to G60 and turbo. Required for engine conversions with PL, KR, 9A and ABF to G60 and turbo engine block, combined with the standard intake manifold
- ✓ flywheel kit consisting of lightened flywheel, sprung sinterpad clutch disc and pressure plate in reinforced design suitable for VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02JJ
- ✓ VW Golf 2 3 Corrado G60 wishbone reinforcing plate 16V 1,8T 2,0 GTI
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ rear axle (front-wheel drive): Golf MK4, Audi A3 8L Seat Toleda Bora
- ✓ brake caliper: Porsche Cayenne , rear axle, reference 955.352.421 + 955.352.422 / Brembo reference left 20.7673.03 + right 20.7673.04
- ✓ brake caliper mounting bracket: Audi S3 8L or VW Golf R32, rear
- ✓ brake disc: 310x22 , rear, VW Phaeton
- ✓ reinforced Sachs Motorsport pressure plate for VW Golf Corrado Passat G60 GTI 16V engines
- ✓ exactly identical to the standard pressure plate, making it easy to replace the standard pressure plate
Aluminum racing engine bracket for all types of engines and vehicles G60
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for rear axle: Golf MK4, Audi TT A3
- ✓ brake caliper: VW Golf R32 V6 or S3 brake caliper left VW reference 8N0615423C, brake caliper right VW referecne 8N0615424C
- ✓ brake caliper mounting braket: reference 8N0615425B
- ✓ brake disc: VW+ Audi 4motion 256x22mm
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Mercedes wheel rims on your vehicle VW.
- ✓ flywheel kit, VW Golf Corrado Passat G60 engines and gearboxes with 228mm clutch e.g. 02A 02J, consisting of lightened flywheel, spring-loaded, organic clutch disc and pressure plate in reinforced design
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ for rear axle: Audi A3 8L, VW Golf MK4, Bora, Jetta MK4, Seat Leon, Toledo, Octavia
- ✓ brake caliper: Porsche , reference 996.352.421 + 996.352.422
- ✓ brake caliper mounting bracket: rear axle , Audi S3 8L or VW Golf R32
- ✓ brake disc: Golf MK 4 280x22mm part number: 1J0 615 301 P
- ✓ fine drive / transmission shaft for lower cars on models Golf MK2 G60 Seat
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ eccentric for article 590 galvanized
- ✓ torsion spring clutch disc with organic performance clutch coating/lining
- ✓ transmittable torque [Nm]: 520
- ✓ diameter [mm]: 228
- ✓ number of teeth: 10
- ✓ hub profile: 23x29-10N
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ complete brake system for rear axle: Golf 4 Bora Vento Audi A3 Series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ blanking / lock / sealing plug made of aluminum black anodized for all brake calipers with M10x1 thread
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ external diameter: 25mm
- ✓ internal diameter: 10,2mm
- ✓ length: 0,75mm
- ✓ material: steel electrolytically galvanized
Hexagonal screw high resistance entirely thread
Type: M16x40
Thread: 1.5
Galvanized
Quality: 10.9
Hexagonal screw entirely thread
Type: M10x30
Galvanized
Quality: 8.8
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ High-strength hexagon head screw with thread up to the head
- ✓ size:M10x40
- ✓ alloy: blank
- ✓ strength class 10.9