Brake Caliper Adapter Volvo 850 T5 850 T5R 4-piston Brake Caliper Alfa Romeo Brake Disc XC90
- ✓ 336x30 30657301 Volvo XC90 brake disc
- ✓ 4-piston 07E121162 / 07E111260 Alfa Romeo brake caliper
- ✓ front axle
€210.71*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for all:
- Volvo 850 T5, 850 T5R and V70 up to year of manufacture 2000
in connection with the Alfa Romeo 159 / Brera / Spider 4-piston Brembo calipers and the Volvo XC90 336x30 brake discs.
Advantages of this brake system:
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
- the original brake lines can be retained.
Required components:
- brake caliper:l Alfa Romeo 4-piston Brembo, reference 07E121162 / 07E111260 / 77363537 / 77364508 / 77364510
- brake pad: Alfa Romeo, reference 77364900 / 77365202
- brake disc: Volvo XC90 336x30 , reference 30657301
Delivery:
- 2x brake caliper adapters for Volvo 850 T5, 850 T5R and V70 up to year of manufacture 2000
- suitable high-strength screw set
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
16 January 2019 10:50
Christoph W
Leider lange Wartezeit, aber gute Kommunikation. Und das warten hat sich gelohnt.
16 May 2024 18:35
Luciano Filippo B
Super Passgenauigkeit. Sehr zu empfehlen 👌👌
27 May 2023 12:43
S.Läuppi 116550 G
Passt Perfekt, im Zusamenhang mit den brembo Zangen.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 336x30
- ✓ 68mm centering
- ✓ 51.4mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 336x30
- ✓ 68mm centering
- ✓ 51.4mm height
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 335x30
- ✓ 68mm centering
- ✓ 52mm height
- ✓ 335x30
- ✓ 68mm centering
- ✓ 52mm height
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 336x30
- ✓ 68mm centering
- ✓ 51.4mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 336x30
- ✓ 68mm centering
- ✓ 51.4mm height
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 335x30
- ✓ 68mm centering
- ✓ 52mm height
- ✓ 335x30
- ✓ 68mm centering
- ✓ 52mm height