Brake caliper adapter Ford Capri Escort Wilwood Dynalite brake caliper Brake disc 245x20 Brake system

✓ 245x20 1595647 Ford Capri brake disc
✓ 4-piston 1206806 Wilwood Dynalite brake caliper
✓ front axle

€137.17*

Available

Product number: 1144

Delivery by Saturday, 19.07.2025 if you order within the next 12 Hours.

Product number: 1144

Weight: 0.926 kg

Brake caliper hole spacing: 133,40

Hole spacing steering knuckle: 82,50

Mounting location: front

Your benefits

Easy TÜV registration
Quality Made in Germany
Fair prices without middlemen you buy directly from the manufacturer and developer of the product
Worldwide no. 1 in tuning adapters
15 years expert knowledge
10 years warranty

Brake caliper adapter for the front axle to be able to use the original Capri 2.8i brake disc 245x20mm in conjunction with the Wilwood Dynalite brake caliper

Suitable for the following vehicles:

Ford Capri Mk1 ausser 3.0 V6
Ford Capri Mk2 ausser 3.0 V6
Ford Capri Mk3 ausser 3.0 V6
Ford Escort Mk1 Twin Cam
Ford Escort Mk1 Mexico
Ford Escort Mk1 RS1600
Ford Escort Mk1 RS2000
Ford Escort Mk2 RS Mexico
Ford Escort Mk2 RS1800
Ford Escort Mk2 RS2000

Advantages:

Extreme deceleration values also in conjunction with our rear axle brake system
Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles
Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
Our EPYTEC brake caliper adapters do not require you to send in your standard parts, no re-welding, re-milling or re-drilling.

Required components:

Brake discs from Ford Capri 2.8i 245x20, part number: 1595647
Wilwood Dynalite brake callipers, part number: 120-6806

Scope of delivery:

2x brake calliper adapter for Ford Capri 1, 2 and 3 and Escort 1, 2 RS 2000 RS1600
Material certificate

Tipps, Infos und Hinweise:

Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

We provide a material certificate for this adapter, allowing the TÜV inspector to easily register the adapter.

Technical data:

Brake caliper hole spacing: 133,40

Hole spacing steering knuckle: 82,50

Mounting location: front

Brake caliper hole spacing: 133,40

Hole spacing steering knuckle: 82,50

Mounting location: front

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

No reviews found. Share your insights with others.

Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Motor	Motorcode
1300	ECJ\|55PS(40KW)
2000	ECJ\|90PS(66KW)
2300	ECJ\|125PS(92KW)
1300	ECJ\|59PS(43KW)
1500	ECJ\|65PS(48KW)
1300	ECJ\|54PS(39KW)
2600	ECJ\|125PS(92KW)
2000	ECJ\|86PS(63KW)
1500	ECJ\|60PS(44KW)
2300	ECJ\|108PS(79KW)
1300	ECJ\|50PS(37KW)
1700	ECJ\|75PS(55KW)
1600	ECJ\|88PS(65KW)
2600 RS	ECJ\|150PS(110KW)

Motor	Motorcode
1.6	GECP\|88PS(65KW)
1.3	GECP\|54PS(40KW)
1.6	GECP\|72PS(53KW)
1.6	GECP\|68PS(50KW)
2.0	GECP\|90PS(66KW)
2.3	GECP\|108PS(79KW)

Motor	Motorcode
2.0	GECP\|101PS(74KW)
1.6	GECP\|73PS(54KW)

Motor	Motorcode
2.0 RS	ATH\|100PS(73KW)
2.0 RS	ATH\|110PS(80KW)

Motor	Motorcode
1300	ECJ\|55PS(40KW)
2000	ECJ\|90PS(66KW)
2300	ECJ\|125PS(92KW)
1300	ECJ\|59PS(43KW)
1500	ECJ\|65PS(48KW)
1300	ECJ\|54PS(39KW)
2600	ECJ\|125PS(92KW)
2000	ECJ\|86PS(63KW)
1500	ECJ\|60PS(44KW)
2300	ECJ\|108PS(79KW)
1300	ECJ\|50PS(37KW)
1700	ECJ\|75PS(55KW)
1600	ECJ\|88PS(65KW)
2600 RS	ECJ\|150PS(110KW)