Brake caliper adapter Audi A3 A1 VW Golf 5 6 Seat Altea Brake disc 356x22 Audi A6 Porsche Cayenne 4-piston brake caliper tuning adapter

✓ 356x22 4H0615601F Audi A6 A7 brake disc
✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
✓ rear axle

€395.76*

Available

Product number: 1190

Delivery by Wednesday, 27.11.2024 if you order within the next 16 Hours.

Product number: 1190

Weight: 6.981 kg

Einbauort: hinten

Lochabstand Achsschenkel: 90mm

Lochabstand Bremssattel : 136mm

Your benefits

Easy TÜV registration
Quality Made in Germany
Fair prices without middlemen you buy directly from the manufacturer and developer of the product
Worldwide no. 1 in tuning adapters
15 years expert knowledge
10 years warranty

Brake caliper adapter to convert the rear axle of the Golf 5, 6, Audi A1, A3 series to Porsche Cayenne brake calipers.

The combination is installed in conjunction with the Audi A6 A7 brake discs 356x22 mm.

The Porsche calipers are connected to the vehicle's hydraulics and can therefore develop enormous braking power. However, as these do not have any handbrake functions, the rear Golf 5R is also used as a handbrake caliper. The hydraulic connection is sealed with a dummy plug. This means that it only serves as a handbrake caliper.

Adapters are suitable for the following VW and Audi models with aluminium axle:

OE 1K0505433/ 1K0505434 / 1K0505435AD / 1K0505436AD

Audi A1 (8X)
Audi A3 (8P)
VW Golf V (1K)
VW Golf VI (5K)
VW Golf Variant V (1K)
VW Golf Variant VI (5K)
Seat Altea (5P)
Skoda Octavia (1Z)
Skoda Octavia (5E)
Skoda Superb (3T)

Advantages of this brake system:

Top deceleration values, no comparison to conventional rear brake discs
A must for performance upgrades
Material certificate is supplied

Required components:

Brembo brake calipers from Porsche Cayenne rear axle part no.: (written on the brake calipers, rear number distinguishes right and left caliper) 955.352.421 + 955.352.422 (only 100% compatible with the specified Porsche calipers) Brembo left: 20.7673.03 right: 20.7673.04
Original brake calipers with carrier for handbrake from Golf 5R / 6R Part number: 1K0615423G / 1K0615424G Carrier: 1K0615426H / 1K0615425H
original Audi A6 A7 brake disc 356x22 mm part number: 4H0 615 601 F

Scope of delivery:

2x brake caliper adapter for rear axle Audi A1 A3 Golf 5 Golf 6 Skoda Octavia series
2x matching centring ring
High-strength fastening screw material
material certificate
Installation instructions (click here)

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: hinten

Lochabstand Achsschenkel: 90mm

Lochabstand Bremssattel : 136mm

Einbauort: hinten

Lochabstand Achsschenkel: 90mm

Lochabstand Bremssattel : 136mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Simply use your social account to log in to our shop. In a few steps you are logged in and can complete your account!

I have read the privacy policy and agree to it

No reviews found. Share your insights with others.

Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Big Brake system KIT VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea brake caliper adapter 360x36 brake disc Mercedes Porsche Panamera 82mm brake caliper

✓ 360x36 A0004211712 / A2184210212 Mercedes CLS 500 brake disc
✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 brake caliper
✓ front axle

€1,617.68*

Item number: 1198-KIT