Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Installation instructions for the brake caliper adapter 1201 Mercedes Benz SLS on the rear axle of the W447

Here you will find step-by-step instructions on how to install the handbrake from the Mercedes-Benz E-Class W211 (2304200312) on the W447 / W639. This is absolutely necessary to ensure that the handbrake function is still available when converting to a larger brake disc and a larger brake system on the rear axle.


Please note  

Please read these instructions carefully before starting work. If the conversion is too difficult for you, please commission a specialist company to carry out the installation. We cannot accept any liability for consequential damage caused by incorrect installation. Correct installation and adjustment will save you time, money and trouble.

What do you need for this?

  • Depending on your technical knowledge, approx. 2-3 hours 
  •  Torque spanner with suitable attachments 
  •  Liquid threadlocker

Dismantling: 

  • Old brake system (brake disc, brake caliper and brake calliper carrier)  
  • Remove or machine the air baffle plate or brake backing plate or armature plate (we prefer to remove them, as the ventilation of the brake is better guaranteed).
  • Remove the wheel hub, handbrake shoes and spreader plates from the wheel bearing housing

!!Important!!: 

It is essential to check that there is no rust or paint residue on the screw-on points of the steering knuckle or wheel hub. If this is the case, please clean them. Then check the steering knuckle threads for damage.

First, the old brake caliper and brake disc must be removed.
The best way to do this is to jack up your vehicle or use a jack. Ideally, you should have a lifting platform available :)
The heat protection plate and the wheel hub must then be removed so that you have free access to the handbrake.
The handbrake must then be completely removed from the wheel bearing housing. It must be ensured that all screw connection points of the handbrake have been loosened and that they can be easily dismantled and removed.
To be able to drive the brake system on the W447, the Mercedes-Benz E-Class W211 (2304200312) must be fitted, as these are less bulky and therefore the new 360x28mm brake discs from the Mercedes GL (09.A907.11) can be fitted.
In order to fit the E-Class (W211) brake shoes without any problems, the wheel bearing housing must be machined slightly (see next pictures)
  • first the cast nipples must be ground flat



Furthermore, everything on the contact surface must be ground slightly flat (see picture).

This must be done so that the new 360x28mm brake disc from the Mercedes Benz GL (09.A907.11), which is slightly smaller in internal diameter than the original brake disc, can be fitted cleanly and does not protrude or grind anywhere.

The handbrake can now be reinstalled on the wheel bearing housing.  

All you need to do is fit the brake shoes for the Mercedes-Benz E-Class W211 (2304200312). You can find them here (click here)

The huge advantage here is that the spreader plates for the handbrake from the Mercedes Benz W447 / W639 can still be used and do not have to be converted to those from the Mercedes Benz E-Class.

If you want to continue using the anchor plate / heat protection plate, this must be slightly adapted.


The wheel hub can now be reattached to the wheel bearing housing.
The preparatory work is now complete and the next step is to convert to the large brake system with the Epytec tuning adapters :)

The tuning Epytec adapter can now be fitted.

It is important to ensure that the adapter with the Epytec lettering and engraving is attached to the inside of the vehicle so that the TÜV inspector can easily read the engraving during approval.

!! Tipp !! Use threadlocker. 

The Mercedes Benz SLS C197 AMG 4-piston brake caliper (part number: A1974232798 / A11974232898) can now be bolted on.

You can then reconnect the brake lines and bleed the brake completely. For this conversion, it is recommended to convert directly to steel flex brake lines.

Click here to go directly to the appropriate steel flex lines (click here )

  • These have the following advantages:
  • No pressure loss when the brakes are applied, noticeably more precise pressure point
  • No swelling as with rubber lines
  • Cost savings, as steel braided lines have an almost unlimited service life and do not have to be replaced every 3-5 years
  • Shorter braking distance
  • Marten protection
  • Optics

The handbrake servomotor can now be relearned and everything works as it did before :)


When the tuning adapter is fitted, the 360x26mm brake disc from the Mercedes-Benz GL Class (09.A907.11) and the Mercedes-Benz SLS C197 AMG 4-piston brake caliper (part number: A1974232798 / A11974232898) can be fitted.
!! Important!! The original handbrake cable can still be used with this conversion and does not need to be shortened.

Once the complete brake system, including the brake disc, has been fitted, it must be checked that everything moves freely and that the brake system is not touching or rubbing anywhere.


Now you can refit the rim. 

When fitting the rim, make sure that the brake caliper does not rub against the rim.  

If this is the case, you can counteract this with track plates if necessary, so that the rim has enough distance to the brake caliper.

The TÜV generally requires a minimum distance of 3 mm.

Click here for our track plates (click here)

The conversion with the Mercedes Benz SLS C197 AMG 4-piston brake caliper (part number: A1974232798 / A11974232898) and the conversion to the handbrake shoes of the Mercedes-Benz E-Class W211 (2304200312) is now complete.

Here is the matching product for the installation instructions

Bremssatteladapter W447 Vito V-Klasse Hinterachse auf 4-Kolben Bremssattel mit 360x26mm Bremmscheibe
  • ✓ 360x26 A1974230112 / 1974230112 Mercedes GL brake disc
  • ✓ 4-piston A1974232798 / A1974232898 Mercedes SLS C197 brake caliper
  • ✓ rear axle

€233.17*
Item number: 1201
Mercedes Benz E-Klasse Maybach Bremsbackensatz Feststellbremse Handbremse 2304200312 2304200320
  • ✓ 1994200020 / 2304200312
  • ✓ OEM quality
  • ✓ Mercedes E-Class. (W211 / S211 / VF211) and much more.

€18.53*
Item number: ZIM217

Any questions or requests?

Then simply get in touch via our contact form (click here)

Tuning Adapter Topseller

Average rating of 4.9 out of 5 stars

Audi A3 S3 TT VW Polo 6R VW Golf MK4 Bora Porsche Brake Caliper Adapter
  • ✓ 323x28 1ML615301 Seat Leon Cupra R brake disc
  • ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
  • ✓ front axle

€155.28*
Item number: 596

Average rating of 4.9 out of 5 stars

Audi TT A3 S3 VW Golf Polo 6r WRC Brake Caliper Adapter Cayenne ZR17 Brake System 334x32
  • ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 R32 brake disc
  • ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne / VW Tuareg brake caliper
  • ✓ front axle

€148.46*
Item number: 403

Average rating of 4.8 out of 5 stars

BMW E30 Wheel Hub Conversion PCD 5x120 E36 E46 Adapter Spacer Front 5 Hole Hub
  • ✓ Conversion bolt circle 5x120
  • ✓ wheel hub E36 / E46
  • ✓ front axle

€105.75*
Item number: 126

Average rating of 4.5 out of 5 stars

Brake caliper adapter BMW 1 series 2 series 3 series 4 series F20 F21 F22 F23 F30 F31 F32 F33 F34 F36 convertible coupe BMW M2 M3 380x30 brake disc 4 piston brake caliper tuning adapter
  • ✓ 380x30 34112284809 34112284810 Brake disc
  • ✓ 4-piston F20 34116799465 34116799466 Brake calipers
  • ✓ front axle

€161.21*
Item number: 1108

Average rating of 4.9 out of 5 stars

Brake Caliper Adapter Porsche for Audi TT A3 S3 VW Golf Polo
  • ✓ 334x32 8N0615301B 1J0615301 R32 brake disc
  • ✓ 6-piston Z18 95535142153 / 95535142253 Cayenne brake caliper
  • ✓ front axle

€160.71*
Item number: 143

Average rating of 4.1 out of 5 stars

Brake Caliper Adapter VW T5 T6 Porsche Panamera 87mm Mercedes Benz Brake Disc 375x36 Front Axle
  • ✓ 375x36 1664210912 Mercedes Benz GL brake disc
  • ✓ 6-piston 7PP615149J / 7PP615150J Cayenne 958 GTS Panamera brake caliper
  • ✓ front axle

€214.39*
Item number: 942

Average rating of 4.9 out of 5 stars

Golf Corrado VR6 16V Brake calipers adapter R32 S3 TT 1,8T 312x25 334x32
  • ✓ 312x25 1J0615301AA 1J0615302A S3 / R32 brake disc
  • ✓ 1-piston 1J0615123E / 1J0615124E S3 / R32 brake caliper
  • ✓ front axle

€34.64*
Item number: 575

Average rating of 4.9 out of 5 stars

Golf MK1 Caddy Brake Caliper Adapter G60 S2 Adapter Brake System
  • ✓ 280x22 535615301 G60 brake disc
  • ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
  • ✓ front axle

€105.70*
Item number: 216

Average rating of 4.9 out of 5 stars

Mercedes Benz C63 W204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston
  • ✓ 390x36 A2314211812 / A2314211812 Mercedes AMG C63 brake disc
  • ✓ 6-piston A2044214798 / A2044214898 Mercedes CLS 63 AMG brake caliper
  • ✓ Front axle

€214.97*
Item number: 890

Average rating of 4.9 out of 5 stars

VW Golf 3 Brake Caliper Adapter Porsche Vr6 GTI Passat 35 16V ZR17 ZL17 Front axle Brake System 334x32
  • ✓ 334x32 1J0615301AA 1J0615302 A Golf 4 brake disc
  • ✓ 6-piston 7L6615123T / 7L6615124T Porsche Cayenne/ VW Tuareg brake caliper
  • ✓ front axle

€133.47*
Item number: 284