Wheel hubs VW Golf Scirocco Corrado G60 Rear axle brake system S3 R32
Wheel hubs for rear axle brake system to fix brake discs typ G60 or Vr6 with diameter 280mm (normally used on front axle) in combination with standard brake calipers from S3.
€155.49*
- Einfache TÜV Eintragung
- Qualität Made in Germany
- Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
- Weltweit Nr 1 in Sachen Tuning Adapter
- 15 Jahre Expertenwissen
- 10 Jahre Garantie
Product description
Tailor-made 4-bolt wheel hubs for rear axle brake system.For fixation of brake discs diameter 280mm from G60 VR6 GTI 16V normally used on front axle in combination with standard brake calipers from Golf 4 V6/R32 or Audi S3 8L year 99.
Depending on the vehicle the wheel hub will be delivered with 4 or 5 fixation holes. Please precise before purchasing.
Scope of delivery:
- 2 x 4bolt wheel hubs to fix the brake discs with thread M12x1.5
Login
9 July 2022 13:21
Nagy L
ok!
1 January 2022 11:51
Pascal P
Produkt ist super das einzige was man verbessern würde wäre die Zentrierung auf die Bremsscheibe mitanzupassen wasman verbaut so wie in meinen fall 256mm vom Corrado Vorna nach Hinten dan bräuchte man keine Zentrieringe Ansonsent passgenau für die Radlager ABS sensoring passt perfekt wie es sich für plug and play verhält.
27 April 2019 17:50
David R
Très bon produit.
23 January 2019 10:53
Florian K
Gute Verarbeitung Sehr gute Passgenauigkeit
2 October 2018 11:54
Jerome D
rien a signaler bon produit
6 September 2018 10:01
Thorsten R
Super schnelle Lieferung und sehr gute Qualität.
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/en/brake-system/adapters/1452/brake-caliper-adapter-custom-made-manufacturing
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/en/brake-system/adapters/1452/brake-caliper-adapter-custom-made-manufacturing