VW T3 Bus Allrad Syncro 16 inch conversion Porsche brake system brake caliper adapter 307x24 brake disc
- ✓ 307x24 34116799351 BMW Mini Countryman brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche 996 brake caliper
- ✓ front axle
€204.69*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the T3 Syncro with 16 inch axle to fit the 4-piston Porsche 996 brake calipers in conjunction with the 307x24 brake disc from the BMW Mini Countyman on the front axle.
The advantages of this brake system are the perfect deceleration values. Furthermore, the price-performance ratio of the Porsche brake calipers and the brake discs is right.
Required components:
- Rear Porsche 996 brake callipers Porsche part number 996.352.421 + 996.352.422
- Brake discs BMW Mini Countryman 307x24 OE numbers: 34116799351
Click here for the matching adapter for the 14 inch axle (click here)
Advantages:
- The remaining fading on the original brake system is gone.
- Significantly better perfomance than the standard brake system.
- Our adaptors do require only small rectifications on your vehicle.Therefore easily transformable in its original condition
- The registration for public road use should be no problem with correct and complete execution of the work.
Scope of delivery:
- 2x brake caliper bracket for the VW T3 Bus Syncro with 16 inch axle
- Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities)
- High resistant screws for fixation
- Stress analysis
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 307x24
- ✓ 79mm centering
- ✓ 45mm height
- ✓ 307x24
- ✓ 79mm centering
- ✓ 45mm height
- ✓ 307x24
- ✓ 79mm centering
- ✓ 45mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
