VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta TTRS RS3 Audi TT brake system brake caliper adapter
- ✓ 334x32 1J0615301AA / 1J0615302A Golf 4 R32 brake disc
- ✓ 4-piston 8J061507 / 8J0615108 TTRS brake caliper
- ✓ front axle
€187.73*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter on models VW Golf MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, for conversion to the TTRS brake calipers, combined with the original R32 brake dics from Golf 4 R32 ( 334x32 bolt circle/PCD 5x100)
Suitable for following vehicles:
- VW Golf MK2 and MK3
- VW Passat
- VW Corrado
- VW Jetta
- VW Polo
- Seat Toledo
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Minimum rim size:
- from 17 inch rim can be used. Depending on the rim shape and type, the minimum size of the inner diameter can vary
Required components:
- brake caliper: TTRS, reference left 8J0 615 107 + right 8J0 615 108
- brake pads: reference 8J0 698 151 E
- brake disc: Golf MK4 R32 334x32mm, reference 1J0 615 301AA + 1J0 615 302 A
Delivery:
- 2x brake caliper adapters for VW Golf 2 3 G60 Passat Scirocco Polo Corrado Jetta
- high strength mounting screws
- material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 June 2020 08:45
Vitali S
Top
28 June 2020 04:51
Vitali S
Top
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 5x100 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 2 -3 / Passat Vento / Seat Ibiza
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ 334x32
- ✓ 65mm centering
- ✓ 35mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ excellent fit
- ✓ front axle Jetta 2 / Golf 2 / Corrado
- ✓ high stability
- ✓ 191498625A Golf 2 Golf 3 Caddy
- ✓ OE quality
- ✓ front axle
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
