Skip to main content
Fair prices all year round instead of Black Friday promotions >
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

VW Corrado Golf 2 3 Passat VR6 Brake Caliper Adapter Panamera Front axle Brake System

  • ✓ 334x32 1J0615301A / 1J0615302A Golf 4 R32 brake discs
  • ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
  • ✓ front axle

Brake caliper adapter for front axle brake disc system to fix Porsche /Brembo Panamera 6 piston brake calipers with R32 brake disc,diameter 334 x 32mm on all VW with bolt circle connection 5x100 mm, VR6 engine.

Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.:

  • Golf 2,3
  • Corrado 
  • Passat VR6

These calipers are used as standard for Porsche Cayenne, VW Touareg, and Q7.

Required material for installation:

  • brake caliper: Porsche Cayenne 958 GTS Panamera, reference 7PP615149J / 7PP615150J (Shaft length from the caliper must be 82mm, see yellow mark on the last picture)
  • brake pads 95835193910
  • Brake discs Golf 4 R32 334x32 mm part no: 1J0 615 301A and 1J0 615 302 A

Advantages:

  • Best possible deceleration values ​​and performance, indispensable even for performance increases
  • Suitable for the narrow VR6 axle and Golf 2 axle when converting to 5 holes, e.g.:
  • Components come from mass production of VW
  • With correct mounting registration with the TÜV possible
  • Including complete screw material

Scope of delivery:

  • 2x caliper adapter complete galvanized for Golf 2.3 Passat VR6
  • Complete screw set high-strength
  • material certificate

Tips, information and hints:

  • For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
  • We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
  • In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers. >> Now directly to spacers <<
  • Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator >> Configure steel braided brake lines <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 94mm
Lochabstand Bremssattel : 205mm
Einbauort: vorne
Lochabstand Achsschenkel: 94mm
Lochabstand Bremssattel : 205mm

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


17 February 2020 18:59

Review with rating of 5 out of 5 stars

Herr H

Passt Top bin voll Zufrieden

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form